Messages in this thread |  | | Date | Thu, 27 Nov 2025 07:30:31 -0600 | | From | "Rob Herring (Arm)" <> | | Subject | Re: [PATCH v5 01/22] dt-bindings: mux: Remove nodename pattern constraints |
| |
On Thu, 27 Nov 2025 12:48:28 +0100, Tommaso Merciai wrote: > The nodename pattern in created an unnecessary restriction that forced > all mux nodes to be named with the 'mux-controller' prefix. > This prevented valid use cases where mux functionality is part of other > hardware blocks that should use more specific naming conventions. > > Remove the $nodename pattern constraints from both the 'select' keyword > and the properties section of the mux-controller schema. > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> > --- > v4->v5: > - Added Reviewed-by tag from Conor Dooley. > > v3->v4: > - New patch. > > Documentation/devicetree/bindings/mux/mux-controller.yaml | 6 ------ > 1 file changed, 6 deletions(-) >
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/slimbus/slimbus.example.dtb: slim@28080000 (qcom,slim-ngd-v1.5.0): 'audio-codec@1,0' does not match any of the regexes: '^pinctrl-[0-9]+$', '^slim@[0-9a-f]+$' from schema $id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/slimbus/slimbus.example.dtb: slim@28080000 (qcom,slim-ngd-v1.5.0): #address-cells: 1 was expected from schema $id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/slimbus/slimbus.example.dtb: slim@28080000 (qcom,slim-ngd-v1.5.0): 'dmas' is a required property from schema $id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/slimbus/slimbus.example.dtb: slim@28080000 (qcom,slim-ngd-v1.5.0): 'dma-names' is a required property from schema $id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2'] Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/d0518a64bac31a5a755471f79d6000aa81657503.1764241212.git.tommaso.merciai.xr@bp.renesas.com
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
|  |