lkml.org 
[lkml]   [2025]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
Date
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.

Signed-off-by: Chengen Du <chengen.du@canonical.com>
---
V1 -> V2: Address build warnings reported by the kernel test robot

drivers/firmware/iscsi_ibft.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 6e9788324fea..371f24569b3b 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -310,7 +310,10 @@ static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
str += sprintf_ipaddr(str, nic->ip_addr);
break;
case ISCSI_BOOT_ETH_SUBNET_MASK:
- val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
+ if (nic->subnet_mask_prefix > 32)
+ val = cpu_to_be32(~0);
+ else
+ val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
str += sprintf(str, "%pI4", &val);
break;
case ISCSI_BOOT_ETH_PREFIX_LEN:
--
2.43.0

\
 
 \ /
  Last update: 2025-01-14 05:13    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog