lkml.org 
[lkml]   [2025]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/3 RESEND] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
Date
From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Add S32G2/S32G3 SoCs compatible strings.

A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.

Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.

Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
---
.../bindings/net/can/fsl,flexcan.yaml | 44 +++++++++++++++++--
1 file changed, 40 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 97dd1a7c5ed2..73252fe56fe6 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -10,9 +10,6 @@ title:
maintainers:
- Marc Kleine-Budde <mkl@pengutronix.de>

-allOf:
- - $ref: can-controller.yaml#
-
properties:
compatible:
oneOf:
@@ -28,6 +25,7 @@ properties:
- fsl,vf610-flexcan
- fsl,ls1021ar2-flexcan
- fsl,lx2160ar1-flexcan
+ - nxp,s32g2-flexcan
- items:
- enum:
- fsl,imx53-flexcan
@@ -43,12 +41,21 @@ properties:
- enum:
- fsl,ls1028ar1-flexcan
- const: fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - nxp,s32g3-flexcan
+ - const: nxp,s32g2-flexcan

reg:
maxItems: 1

interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 4
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 4

clocks:
maxItems: 2
@@ -136,6 +143,35 @@ required:
- reg
- interrupts

+allOf:
+ - $ref: can-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nxp,s32g2-flexcan
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
+ - description: Device state change
+ - description: Bus Error detection
+ - description: Message Buffer interrupt for mailboxes 8-127
+ interrupt-names:
+ items:
+ - const: mb-0
+ - const: state
+ - const: berr
+ - const: mb-1
+ required:
+ - interrupt-names
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names: false
+
additionalProperties: false

examples:
--
2.45.2

\
 
 \ /
  Last update: 2025-01-13 13:08    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog