Messages in this thread |  | | From | Ninad Palsule <> | | Subject | [PATCH v4 0/9] DTS updates for system1 BMC | | Date | Mon, 13 Jan 2025 13:48:10 -0600 |
| |
Hello,
Please review the patch set.
V4: --- - Removed "Add RGMII support" patch as it needs some work from the driver side. - Improved IPBM device documentation. - There is a new warning in CHECK_DTBS which are false positive so ignored them. arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+'
V3: --- - Fixed dt_binding_check warnings in ipmb-dev.yaml - Updated title and description in ipmb-dev.yaml file. - Updated i2c-protocol description in ipmb-dev.yaml file.
V2: --- Fixed CHECK_DTBS errors by - Using generic node names - Documenting phy-mode rgmii-rxid in ftgmac100.yaml - Adding binding documentation for IPMB device interface
NINAD PALSULE (6): ARM: dts: aspeed: system1: Add IPMB device ARM: dts: aspeed: system1: Add GPIO line name ARM: dts: aspeed: system1: Reduce sgpio speed ARM: dts: aspeed: system1: Update LED gpio name ARM: dts: aspeed: system1: Remove VRs max8952 ARM: dts: aspeed: system1: Mark GPIO line high/low
Ninad Palsule (3): dt-bindings: net: faraday,ftgmac100: Add phys mode bindings: ipmi: Add binding for IPMB device intf ARM: dts: aspeed: system1: Disable gpio pull down
.../devicetree/bindings/ipmi/ipmb-dev.yaml | 55 +++++++ .../bindings/net/faraday,ftgmac100.yaml | 3 + .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 139 +++++++++++------- 3 files changed, 143 insertions(+), 54 deletions(-) create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
-- 2.43.0
|  |