lkml.org 
[lkml]   [2024]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] drm/bridge: adv7511: Exit interrupt handling when necessary
From
On 5/20/24 17:08, Dmitry Baryshkov wrote:
> On Mon, 20 May 2024 at 06:29, Liu Ying <victor.liu@nxp.com> wrote:
>>
>> On 5/20/24 06:11, Dmitry Baryshkov wrote:
>>> On Thu, May 16, 2024 at 06:10:06PM +0800, Liu Ying wrote:
>>>> Commit f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
>>>> fails to consider the case where adv7511->i2c_main->irq is zero, i.e.,
>>>> no interrupt requested at all.
>>>>
>>>> Without interrupt, adv7511_wait_for_edid() could return -EIO sometimes,
>>>> because it polls adv7511->edid_read flag by calling adv7511_irq_process()
>>>> a few times, but adv7511_irq_process() happens to refuse to handle
>>>> interrupt by returning -ENODATA. Hence, EDID retrieval fails randomly.
>>>>
>>>> Fix the issue by checking adv7511->i2c_main->irq before exiting interrupt
>>>> handling from adv7511_irq_process().
>>>>
>>>> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
>>>> Signed-off-by: Liu Ying <victor.liu@nxp.com>
>>>> ---
>>>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
>>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> index 6089b0bb9321..2074fa3c1b7b 100644
>>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> @@ -479,7 +479,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
>>>> return ret;
>>>>
>>>> /* If there is no IRQ to handle, exit indicating no IRQ data */
>>>> - if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
>>>> + if (adv7511->i2c_main->irq &&
>>>> + !(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
>>>> !(irq1 & ADV7511_INT1_DDC_ERROR))
>>>> return -ENODATA;
>>>
>>> I think it might be better to handle -ENODATA in adv7511_wait_for_edid()
>>> instead. WDYT?
>>
>> Then, adv7511_cec_irq_process() will have less chance to be called from
>> adv7511_irq_process() (assuming CONFIG_DRM_I2C_ADV7511_CEC is defined)
>> if adv7511->i2c_main->irq is zero.
>>
>> But, anyway, it seems that commit f3d9683346d6 ("drm/bridge: adv7511:
>> Allow IRQ to share GPIO pins") is even more broken to handle the CEC case,
>> as adv7511_cec_adap_enable() may enable some interrupts for CEC.
>>
>> This is a bit complicated. Thoughts?
>
> Send a revert and do it properly?

Good idea. Adam, can you do that?

\
 
 \ /
  Last update: 2024-05-20 11:26    [W:0.033 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site