lkml.org 
[lkml]   [2024]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: (subset) [PATCH v1 1/1] backlight: mp3309c: fix leds flickering in pwm mode
On Thu, 02 May 2024, Lee Jones wrote:

> On Wed, 17 Apr 2024 17:31:05 +0200, Flavio Suligoi wrote:
> > The mp3309 has two configuration registers, named according to their
> > address (0x00 and 0x01).
> > In the second register (0x01), the bit DIMS (Dimming Mode Select) must
> > be always 0 (zero), in both analog (via i2c commands) and pwm dimming
> > mode.
> >
> > In the initial driver version, the DIMS bit was set in pwm mode and
> > reset in analog mode.
> > But if the DIMS bit is set in pwm dimming mode and other devices are
> > connected on the same i2c bus, every i2c commands on the bus generates a
> > flickering on the LEDs powered by the mp3309c.
> >
> > [...]
>
> Applied, thanks!
>
> [1/1] backlight: mp3309c: fix leds flickering in pwm mode
> commit: ce60cddc2abf61902dfca71d630624db95315124

Applied, but in future it's; I2C, PWM and LED, thanks.

--
Lee Jones [李琼斯]

\
 
 \ /
  Last update: 2024-05-27 18:14    [W:0.087 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site