lkml.org 
[lkml]   [2024]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v12 6/6] ARM: dts: wpcm450: Switch clocks to clock controller
This change is incompatible with older kernels because it requires the
clock controller driver, but I think that's acceptable because WPCM450
support is generally still in an early phase.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

It's probably best to delay merging of this patch until after the driver
is merged; I'm including it here for review, and in case someone wants
to set up a shared branch between the clock and devicetree parts.

v12:
- work around timer-npcm7xx driver issue by providing timer clock separately

v11:
- no changes

v10:
- Reintroducing this patch as part of the clock/reset controller series
---
arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 32 ++++++++++++++++----------
1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index ff153858801ccf..daf4d399ecab4c 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -2,6 +2,7 @@
// Copyright 2021 Jonathan Neuschäfer

#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>

/ {
compatible = "nuvoton,wpcm450";
@@ -30,13 +31,6 @@ cpu@0 {
};
};

- clk24m: clock-24mhz {
- /* 24 MHz dummy clock */
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
refclk: clock-ref {
/* 48 MHz reference oscillator */
compatible = "fixed-clock";
@@ -44,6 +38,19 @@ refclk: clock-ref {
#clock-cells = <0>;
};

+ refclk_div2: clock-refdiv2 {
+ /*
+ * reference oscillator divided by 2, as a workaround because
+ * the npcm7xx-timer driver needs its clock earlier than the
+ * clk-wpcm450 driver (as a platform driver) can provide it.
+ */
+ compatible = "fixed-factor-clock";
+ clocks = <&refclk>;
+ #clock-cells = <0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -70,7 +77,7 @@ serial0: serial@b8000000 {
reg = <0xb8000000 0x20>;
reg-shift = <2>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART0>;
pinctrl-names = "default";
pinctrl-0 = <&bsp_pins>;
status = "disabled";
@@ -81,7 +88,7 @@ serial1: serial@b8000100 {
reg = <0xb8000100 0x20>;
reg-shift = <2>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART1>;
status = "disabled";
};

@@ -89,14 +96,15 @@ timer0: timer@b8001000 {
compatible = "nuvoton,wpcm450-timer";
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb8001000 0x1c>;
- clocks = <&clk24m>;
+ clocks = <&refclk_div2>,
+ <&refclk_div2>;
};

watchdog0: watchdog@b800101c {
compatible = "nuvoton,wpcm450-wdt";
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb800101c 0x4>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_WDT>;
};

aic: interrupt-controller@b8002000 {
@@ -480,7 +488,7 @@ fiu: spi-controller@c8000000 {
#size-cells = <0>;
reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
reg-names = "control", "memory";
- clocks = <&clk 0>;
+ clocks = <&clk WPCM450_CLK_FIU>;
nuvoton,shm = <&shm>;
status = "disabled";
};
--
2.43.0


\
 
 \ /
  Last update: 2024-05-27 18:12    [W:0.058 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site