lkml.org 
[lkml]   [2024]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller
Hi,

keguang.zhang@gmail.com wrote on Sat, 18 May 2024 16:01:01 +0800:

> On Mon, May 6, 2024 at 3:14 PM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> >
> > Hello,
> >
> > devnull+keguang.zhang.gmail.com@kernel.org wrote on Tue, 30 Apr 2024
> > 19:11:10 +0800:
> >
> > > From: Keguang Zhang <keguang.zhang@gmail.com>
> > >
> > > Add devicetree binding document for Loongson-1 NAND Controller.
> > >
> > > Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> > > ---
> > > Changes in v7:
> > > - rename the file to loongson,ls1b-nfc.yaml
> > >
> > > Changes in v6:
> > > - A newly added patch
> > > ---
> > > .../devicetree/bindings/mtd/loongson,ls1b-nfc.yaml | 66 ++++++++++++++++++++++
> > > 1 file changed, 66 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
> > > new file mode 100644
> > > index 000000000000..a69f22b9fd9e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
> > > @@ -0,0 +1,66 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mtd/loongson,ls1b-nfc.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Loongson-1 NAND Controller
> > > +
> > > +maintainers:
> > > + - Keguang Zhang <keguang.zhang@gmail.com>
> > > +
> > > +allOf:
> > > + - $ref: nand-controller.yaml
> > > +
> > > +properties:
> > > + compatible:
> > > + oneOf:
> > > + - const: loongson,ls1b-nfc
> >
> > What is the rationale behind this choice? Seems like the b variant has
> > two possible implementations and should always be preceded by a more
> > specific compatible.
> >
> > As there is currently no description of this controller upstream, I
> > would not care too much about any out-of-tree description and directly
> > go for a clean description.
> >
> Excuse me, should I add a description for this property?

No, description is not needed. But you are allowing the
"loongson,ls1b-nfc" compatible alone, which I think is not relevant,
unless you convince me it is :-)

> > > + - items:
> > > + - enum:
> > > + - loongson,ls1a-nfc
> > > + - loongson,ls1c-nfc
> > > + - const: loongson,ls1b-nfc
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + dmas:
> > > + maxItems: 1
> > > +
> > > + dma-names:
> > > + const: rxtx
> > > +
> > > +patternProperties:
> > > + "^nand@[0-3]$":
> > > + type: object
> > > + $ref: raw-nand-chip.yaml
> > > +
> > > + unevaluatedProperties: false
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - dmas
> > > + - dma-names
> >
> > Should DMA props be required?
> >
> Yes. This NAND controller only works with DMA, which means the DMA is necessary.

Ok

>
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + nand-controller@1fe78000 {
> > > + compatible = "loongson,ls1b-nfc";
> > > + reg = <0x1fe78000 0x40>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + dmas = <&dma 0>;
> > > + dma-names = "rxtx";
> >
> > There is a preferred spacing for DT nodes, see:
> > https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
> >
> Sorry. I don't get the meaning of preferred spacing.
> https://docs.kernel.org/devicetree/bindings/writing-schema.html says
> "For DTS examples in the schema, preferred is four-space indentation."
> Then I used four-space indentation.

I'm talking about the new lines (\n) between the properties.

>
> > > +
> > > + nand@0 {
> > > + reg = <0>;
> > > + nand-use-soft-ecc-engine;
> > > + nand-ecc-algo = "hamming";
> >
> > These two properties are not needed. Unless there is no hardware ECC
> > capability on this controller and in this case you need to ensure the
> > properties are present in the schema.
>
> Exactly. This NAND controller doesn't support hardware ECC.
> 'nand-use-soft-ecc-engine' and 'nand-ecc-algo' are present in nand-chip.yaml.
> Is there anything else I should do?

Thry are in nand-chip.yaml, which means they are allowed, but I want
them mandatory:

required:
- foo
- bar

Thanks,
Miquèl

\
 
 \ /
  Last update: 2024-05-18 12:48    [W:0.056 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site