lkml.org 
[lkml]   [2024]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] pinctrl: rockchip: add rk3308b SoC support
From
Le 15/05/2024 à 14:16, Dmitry Yashin a écrit :
> Add pinctrl support for rk3308b. This pin controller much the same as
> rk3308's, but with additional iomux routes and 3bit iomuxes selected
> via gpio##_sel_src_ctrl registers. Set them up in the function
> rk3308b_soc_sel_src_init to use new 3bit iomuxes over some 2bit old ones.
>
> Fixes: 1f3e25a06883 ("pinctrl: rockchip: fix RK3308 pinmux bits")
> Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com>
> ---
> drivers/pinctrl/pinctrl-rockchip.c | 200 +++++++++++++++++++++++++++++
> drivers/pinctrl/pinctrl-rockchip.h | 1 +
> 2 files changed, 201 insertions(+)

Hi,

>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index cc647db76927..15d2045f929e 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -632,6 +632,115 @@ static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
> },
> };
>
> +static struct rockchip_mux_recalced_data rk3308b_mux_recalced_data[] = {

It is likely that it would require some other changes, but it looks to
be a good candidate for static const struct.

> + {
> + /* gpio1b6_sel */
> + .num = 1,
> + .pin = 14,
> + .reg = 0x28,
> + .bit = 12,
> + .mask = 0xf
> + }, {

..

> @@ -882,6 +991,35 @@ static struct rockchip_mux_route_data rk3308_mux_route_data[] = {
> RK_MUXROUTE_SAME(2, RK_PA4, 3, 0x600, BIT(16 + 2) | BIT(2)), /* pdm-clkm-m2 */
> };
>
> +static struct rockchip_mux_route_data rk3308b_mux_route_data[] = {

Same

> + RK_MUXROUTE_SAME(0, RK_PC3, 1, 0x314, BIT(16 + 0) | BIT(0)), /* rtc_clk */
> + RK_MUXROUTE_SAME(1, RK_PC6, 2, 0x314, BIT(16 + 2) | BIT(16 + 3)), /* uart2_rxm0 */
> + RK_MUXROUTE_SAME(4, RK_PD2, 2, 0x314, BIT(16 + 2) | BIT(16 + 3) | BIT(2)), /* uart2_rxm1 */
> + RK_MUXROUTE_SAME(0, RK_PB7, 2, 0x608, BIT(16 + 8) | BIT(16 + 9)), /* i2c3_sdam0 */

..

> @@ -3746,6 +3929,21 @@ static struct rockchip_pin_ctrl rk3308_pin_ctrl = {
> .schmitt_calc_reg = rk3308_calc_schmitt_reg_and_bit,
> };
>
> +static struct rockchip_pin_ctrl rk3308b_pin_ctrl = {

This one could be constify without any other changes I think (and also
makes more sense because of its function pointers)

Just my 2c.

CJ

> + .pin_banks = rk3308_pin_banks,
> + .nr_banks = ARRAY_SIZE(rk3308_pin_banks),
> + .label = "RK3308b-GPIO",
> + .type = RK3308B,
> + .grf_mux_offset = 0x0,
> + .iomux_recalced = rk3308b_mux_recalced_data,
> + .niomux_recalced = ARRAY_SIZE(rk3308b_mux_recalced_data),
> + .iomux_routes = rk3308b_mux_route_data,
> + .niomux_routes = ARRAY_SIZE(rk3308b_mux_route_data),
> + .pull_calc_reg = rk3308_calc_pull_reg_and_bit,
> + .drv_calc_reg = rk3308_calc_drv_reg_and_bit,
> + .schmitt_calc_reg = rk3308_calc_schmitt_reg_and_bit,
> +};

..


\
 
 \ /
  Last update: 2024-05-27 18:28    [W:0.060 / U:1.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site