lkml.org 
[lkml]   [2024]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 5/7] riscv: add double trap driver


On 27/04/2024 01:59, Deepak Gupta wrote:
> On Thu, Apr 18, 2024 at 04:26:44PM +0200, Clément Léger wrote:
>> Add a small driver to request double trap enabling as well as
>> registering a SSE handler for double trap. This will also be used by KVM
>> SBI FWFT extension support to detect if it is possible to enable double
>> trap in VS-mode.
>>
>> Signed-off-by: Clément Léger <cleger@rivosinc.com>
>> ---
>> arch/riscv/include/asm/sbi.h    |  1 +
>> drivers/firmware/Kconfig        |  7 +++
>> drivers/firmware/Makefile       |  1 +
>> drivers/firmware/riscv_dbltrp.c | 95 +++++++++++++++++++++++++++++++++
>> include/linux/riscv_dbltrp.h    | 19 +++++++
>> 5 files changed, 123 insertions(+)
>> create mode 100644 drivers/firmware/riscv_dbltrp.c
>> create mode 100644 include/linux/riscv_dbltrp.h
>>
>> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
>> index 744aa1796c92..9cd4ca66487c 100644
>> --- a/arch/riscv/include/asm/sbi.h
>> +++ b/arch/riscv/include/asm/sbi.h
>> @@ -314,6 +314,7 @@ enum sbi_sse_attr_id {
>> #define SBI_SSE_ATTR_INTERRUPTED_FLAGS_SPIE    (1 << 2)
>>
>> #define SBI_SSE_EVENT_LOCAL_RAS        0x00000000
>> +#define SBI_SSE_EVENT_LOCAL_DOUBLE_TRAP    0x00000001
>> #define SBI_SSE_EVENT_GLOBAL_RAS    0x00008000
>> #define SBI_SSE_EVENT_LOCAL_PMU        0x00010000
>> #define SBI_SSE_EVENT_LOCAL_SOFTWARE    0xffff0000
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 59f611288807..a037f6e89942 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -197,6 +197,13 @@ config RISCV_SSE_TEST
>>       Select if you want to enable SSE extension testing at boot time.
>>       This will run a series of test which verifies SSE sanity.
>>
>> +config RISCV_DBLTRP
>> +    bool "Enable Double trap handling"
>> +    depends on RISCV_SSE && RISCV_SBI
>> +    default n
>> +    help
>> +      Select if you want to enable SSE double trap handler.
>> +
>> config SYSFB
>>     bool
>>     select BOOT_VESA_SUPPORT
>> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
>> index fb7b0c08c56d..ad67a1738c0f 100644
>> --- a/drivers/firmware/Makefile
>> +++ b/drivers/firmware/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
>> obj-$(CONFIG_FW_CFG_SYSFS)    += qemu_fw_cfg.o
>> obj-$(CONFIG_RISCV_SSE)        += riscv_sse.o
>> obj-$(CONFIG_RISCV_SSE_TEST)    += riscv_sse_test.o
>> +obj-$(CONFIG_RISCV_DBLTRP)    += riscv_dbltrp.o
>> obj-$(CONFIG_SYSFB)        += sysfb.o
>> obj-$(CONFIG_SYSFB_SIMPLEFB)    += sysfb_simplefb.o
>> obj-$(CONFIG_TI_SCI_PROTOCOL)    += ti_sci.o
>> diff --git a/drivers/firmware/riscv_dbltrp.c
>> b/drivers/firmware/riscv_dbltrp.c
>> new file mode 100644
>> index 000000000000..72f9a067e87a
>> --- /dev/null
>> +++ b/drivers/firmware/riscv_dbltrp.c
>> @@ -0,0 +1,95 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2023 Rivos Inc.
>> + */
>
> nit: fix copyright year
>> +
>> +#define pr_fmt(fmt) "riscv-dbltrp: " fmt
>> +
>> +#include <linux/cpu.h>
>> +#include <linux/init.h>
>> +#include <linux/riscv_dbltrp.h>
>> +#include <linux/riscv_sse.h>
>> +
>> +#include <asm/sbi.h>
>> +
>> +static bool double_trap_enabled;
>> +
>> +static int riscv_sse_dbltrp_handle(uint32_t evt, void *arg,
>> +                   struct pt_regs *regs)
>> +{
>> +    __show_regs(regs);
>> +    panic("Double trap !\n");
>> +
>> +    return 0;
> Curious:
> Does panic return?
> What's the point of returning from here?

Hi Deepak,

No, panic() does not return and indeed, the "return 0" is useless. It's
a leftover of a previous implementation without panic in order to keep
GCC mouth shut ;).

>
>> +}
>> +
>> +struct cpu_dbltrp_data {
>> +    int error;
>> +};
>> +
>> +static void
>> +sbi_cpu_enable_double_trap(void *data)
>> +{
>> +    struct sbiret ret;
>> +    struct cpu_dbltrp_data *cdd = data;
>> +
>> +    ret = sbi_ecall(SBI_EXT_FWFT, SBI_EXT_FWFT_SET,
>> +            SBI_FWFT_DOUBLE_TRAP_ENABLE, 1, 0, 0, 0, 0);
>> +
>> +    if (ret.error) {
>> +        cdd->error = 1;
>> +        pr_err("Failed to enable double trap on cpu %d\n",
>> smp_processor_id());
>> +    }
>> +}
>> +
>> +static int sbi_enable_double_trap(void)
>> +{
>> +    struct cpu_dbltrp_data cdd = {0};
>> +
>> +    on_each_cpu(sbi_cpu_enable_double_trap, &cdd, 1);
>> +    if (cdd.error)
>> +        return -1;
>
> There is a bug here. If `sbi_cpu_enable_double_trap` failed on all cpus
> but last cpu.
> Then cdd.error would not record error and will be reflect as if double
> trap was enabled.

cdd.error is only written in case of error by the per-cpu callbacks, so
it is only set if enabled failed. Is there something I'm missing ?

Thanks,

Clément

>
> Its less likely to happen that FW would return success for one cpu and
> fail for others.
> But there is non-zero probablity here.
>


\
 
 \ /
  Last update: 2024-05-27 18:26    [W:0.251 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site