lkml.org 
[lkml]   [2024]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
While commit 255ec3879dd4 ("phy: exynos5-usbdrd: Add 26MHz ref clk
support") correctly states that CLKRSTCTRL[7:5] doesn't need to be set
on modern Exynos platforms, SSPPLLCTL[2:0] should be programmed with
the frequency of the reference clock for the USB2.0 phy.

Do so.

Fixes: 691525074db9 ("phy: exynos5-usbdrd: Add Exynos850 support")
Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
Feel free to drop the Fixes: if you think that is unwarranted here.

v2: add missing bitfield.h include (seems this is implied on some
platforms, but not on others)
---
drivers/phy/samsung/phy-exynos5-usbdrd.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index d69187c22613..4f30ced439b9 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -8,6 +8,7 @@
* Author: Vivek Gautam <gautam.vivek@samsung.com>
*/

+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -155,6 +156,9 @@
#define CLKRST_PORT_RST BIT(1)
#define CLKRST_PHY_SW_RST BIT(3)

+#define EXYNOS850_DRD_SSPPLLCTL 0x30
+#define SSPPLLCTL_FSEL GENMASK(2, 0)
+
#define EXYNOS850_DRD_UTMI 0x50
#define UTMI_FORCE_SLEEP BIT(0)
#define UTMI_FORCE_SUSPEND BIT(1)
@@ -788,6 +792,31 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL;
writel(reg, regs_base + EXYNOS850_DRD_HSP);

+ reg = readl(regs_base + EXYNOS850_DRD_SSPPLLCTL);
+ reg &= ~SSPPLLCTL_FSEL;
+ switch (phy_drd->extrefclk) {
+ case EXYNOS5_FSEL_50MHZ:
+ reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 7);
+ break;
+ case EXYNOS5_FSEL_26MHZ:
+ reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 6);
+ break;
+ case EXYNOS5_FSEL_24MHZ:
+ reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 2);
+ break;
+ case EXYNOS5_FSEL_20MHZ:
+ reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 1);
+ break;
+ case EXYNOS5_FSEL_19MHZ2:
+ reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 0);
+ break;
+ default:
+ dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n",
+ phy_drd->extrefclk);
+ break;
+ }
+ writel(reg, regs_base + EXYNOS850_DRD_SSPPLLCTL);
+
/* Power up PHY analog blocks */
reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST);
reg &= ~HSP_TEST_SIDDQ;
--
2.45.0.rc0.197.gbae5840b3b-goog


\
 
 \ /
  Last update: 2024-05-01 11:20    [W:0.065 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site