From: Jonathan Marek <jonathan@marek.ca>

Add necessary DPU timing and control changes for DSC to work with DSI
video mode.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 9 +++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          | 8 ++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index d9e7dbf0499c..c7b009a60b63 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -115,6 +115,15 @@ static void drm_mode_to_intf_timing_params(
 		timing->h_front_porch = timing->h_front_porch >> 1;
 		timing->hsync_pulse_width = timing->hsync_pulse_width >> 1;
 	}
+
+	/*
+	 * for DSI, if compression is enabled, then divide the horizonal active
+	 * timing parameters by compression ratio.
+	 */
+	if (phys_enc->hw_intf->cap->type != INTF_DP && timing->compression_en) {
+		timing->width = timing->width / 3; /* XXX: don't assume 3:1 compression ratio */
+		timing->xres = timing->width;
+	}
 }
 
 static u32 get_horizontal_total(const struct dpu_hw_intf_timing_params *timing)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 965692ef7892..079efb48db05 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -167,6 +167,14 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 		intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
 
 	data_width = p->width;
+	if (p->wide_bus_en && !dp_intf)
+		data_width = p->width >> 1;
+
+	if (p->compression_en)
+		intf_cfg2 |= INTF_CFG2_DCE_DATA_COMPRESS;
+
+	if (p->compression_en && dp_intf)
+		DPU_ERROR("missing adjustments for DSC+DP\n");
 
 	hsync_data_start_x = hsync_start_x;
 	hsync_data_end_x =  hsync_start_x + data_width - 1;
-- 
2.34.1