[lkml]   [2024]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/4] drm/panel: add support for LG SW43408 panel
The LG SW43408 panel is used on Google Pixel3 devices. For a long time
we could not submit the driver, as the panel was not coming up from the
reset. The panel seems to be picky about some of the delays during init
and it also uses non-standard payload for MIPI_DSI_COMPRESSION_MODE.

Signed-off-by: Dmitry Baryshkov <>
Changes in v3:
- Fixed return type of MIPI DSC functions
- Replaced mipi_dsi_compression_mode_raw() with
mipi_dsi_compression_mode_ext() (Marijn)
- Link to v2:

Changes in v2:
- Removed formatting char from schema (Krzysztof)
- Moved additionalProperties after required (Krzysztof)
- Added example to the schema (Krzysztof)
- Removed obsolete comment in the commit message (Marijn)
- Moved DSC params to the panel struct (Marijn)
- Changed dsc_en to be an array (Marijn)
- Added comment regiarding slice_width and slice_count (Marijn)
- Link to v1:

Dmitry Baryshkov (2):
drm/mipi-dsi: use correct return type for the DSC functions
drm/mipi-dsi: add mipi_dsi_compression_mode_ext()

Sumit Semwal (2):
dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
drm: panel: Add LG sw43408 panel driver

.../bindings/display/panel/lg,sw43408.yaml | 62 ++++
drivers/gpu/drm/drm_mipi_dsi.c | 37 ++-
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lg-sw43408.c | 326 +++++++++++++++++++++
include/drm/drm_mipi_dsi.h | 15 +-
7 files changed, 449 insertions(+), 11 deletions(-)
base-commit: a6bd6c9333397f5a0e2667d4d82fef8c970108f2
change-id: 20240330-lg-sw43408-panel-b552f411c53e

Best regards,
Dmitry Baryshkov <>

 \ /
  Last update: 2024-04-02 01:51    [W:0.116 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site