lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: qcom: dispcc-x1e80100: Drop the reconfiguring of PLL0 on probe
On 24-04-18 13:51:22, Abel Vesa wrote:
> Currently, PLL0 is configured by the bootloader is the parent of the
> mdp_clk_src. Reconfiguring it on probe leaves the PLL0 in "stand-by"
> state (unlocked), which will trigger RCG child clocks to not update
> their config, which then breaks eDP on all x1e80100 boards. So rely
> on the bootloader for now. Drop the config values as well. Also add
> a comment to explain why the PLL0 is not configured alongside PLL1.
>
> Fixes: ee3f0739035f ("clk: qcom: Add dispcc clock driver for x1e80100")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Ignore this one. Sent a separate patch that handles this in another way:
https://lore.kernel.org/all/20240418-clk-qcom-lucid-evo-skip-configuring-enabled-v1-1-caede5f1c7a3@linaro.org/

> drivers/clk/qcom/dispcc-x1e80100.c | 16 +---------------
> 1 file changed, 1 insertion(+), 15 deletions(-)
>
> diff --git a/drivers/clk/qcom/dispcc-x1e80100.c b/drivers/clk/qcom/dispcc-x1e80100.c
> index 0b2ee6456762..525f645094a8 100644
> --- a/drivers/clk/qcom/dispcc-x1e80100.c
> +++ b/drivers/clk/qcom/dispcc-x1e80100.c
> @@ -73,20 +73,6 @@ static const struct pll_vco lucid_ole_vco[] = {
> { 249600000, 2300000000, 0 },
> };
>
> -static const struct alpha_pll_config disp_cc_pll0_config = {
> - .l = 0xd,
> - .alpha = 0x6492,
> - .config_ctl_val = 0x20485699,
> - .config_ctl_hi_val = 0x00182261,
> - .config_ctl_hi1_val = 0x82aa299c,
> - .test_ctl_val = 0x00000000,
> - .test_ctl_hi_val = 0x00000003,
> - .test_ctl_hi1_val = 0x00009000,
> - .test_ctl_hi2_val = 0x00000034,
> - .user_ctl_val = 0x00000000,
> - .user_ctl_hi_val = 0x00000005,
> -};
> -
> static struct clk_alpha_pll disp_cc_pll0 = {
> .offset = 0x0,
> .vco_table = lucid_ole_vco,
> @@ -1670,7 +1656,7 @@ static int disp_cc_x1e80100_probe(struct platform_device *pdev)
> goto err_put_rpm;
> }
>
> - clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
> + /* Configure only PLL1. PLL0 is already configured by bootloader */
> clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
>
> /* Enable clock gating for MDP clocks */
>
> ---
> base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
> change-id: 20240418-x1e80100-dispcc-drop-pll0-reconfigure-0111b338c838
>
> Best regards,
> --
> Abel Vesa <abel.vesa@linaro.org>
>

\
 
 \ /
  Last update: 2024-05-27 16:45    [W:0.035 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site