lkml.org 
[lkml]   [2024]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v10 5/8] cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
Date
[AMD Official Use Only - General]

Regards.
Perry

> -----Original Message-----
> From: Huang, Ray <Ray.Huang@amd.com>
> Sent: Monday, April 15, 2024 10:59 PM
> To: Yuan, Perry <Perry.Yuan@amd.com>
> Cc: rafael.j.wysocki@intel.com; Limonciello, Mario
> <Mario.Limonciello@amd.com>; viresh.kumar@linaro.org; Shenoy, Gautham
> Ranjal <gautham.shenoy@amd.com>; Petkov, Borislav
> <Borislav.Petkov@amd.com>; Deucher, Alexander
> <Alexander.Deucher@amd.com>; Huang, Shimmer
> <Shimmer.Huang@amd.com>; oleksandr@natalenko.name; Du, Xiaojian
> <Xiaojian.Du@amd.com>; Meng, Li (Jassmine) <Li.Meng@amd.com>; linux-
> pm@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v10 5/8] cpufreq: amd-pstate: Bail out if
> min/max/nominal_freq is 0
>
> On Mon, Mar 25, 2024 at 11:03:25AM +0800, Yuan, Perry wrote:
> > The amd-pstate driver cannot work when the min_freq, nominal_freq or
> > the max_freq is zero. When this happens it is prudent to error out
> > early on rather than waiting failing at the time of the governor
> > initialization.
> >
> > Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
> > Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
> > Signed-off-by: Perry Yuan <perry.yuan@amd.com>
> > ---
> > drivers/cpufreq/amd-pstate.c | 16 ++++++++++------
> > 1 file changed, 10 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/cpufreq/amd-pstate.c
> > b/drivers/cpufreq/amd-pstate.c index 132330b4942f..6708c436e1a2
> 100644
> > --- a/drivers/cpufreq/amd-pstate.c
> > +++ b/drivers/cpufreq/amd-pstate.c
> > @@ -839,9 +839,11 @@ static int amd_pstate_cpu_init(struct
> cpufreq_policy *policy)
> > nominal_freq = READ_ONCE(cpudata->nominal_freq);
> > lowest_nonlinear_freq = READ_ONCE(cpudata-
> >lowest_nonlinear_freq);
> >
> > - if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
> > - dev_err(dev, "min_freq(%d) or max_freq(%d) value is
> incorrect\n",
> > - min_freq, max_freq);
> > + if (min_freq <= 0 || max_freq <= 0 ||
> > + nominal_freq <= 0 || min_freq > max_freq) {
> > + dev_err(dev,
> > + "min_freq(%d) or max_freq(%d) or nominal_freq
> (%d) value is incorrect\n",
> > + min_freq, max_freq, nominal_freq);
>
> I suggest that we add one comment to remind that should be the error of
> ACPI table or BIOS.

Ok, thanks for comment, will add one more comment in v11.

>
> > ret = -EINVAL;
> > goto free_cpudata1;
> > }
> > @@ -1299,9 +1301,11 @@ static int amd_pstate_epp_cpu_init(struct
> cpufreq_policy *policy)
> > max_freq = READ_ONCE(cpudata->max_freq);
> > nominal_freq = READ_ONCE(cpudata->nominal_freq);
> > lowest_nonlinear_freq = READ_ONCE(cpudata-
> >lowest_nonlinear_freq);
> > - if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
> > - dev_err(dev, "min_freq(%d) or max_freq(%d) value is
> incorrect\n",
> > - min_freq, max_freq);
> > + if (min_freq <= 0 || max_freq <= 0 ||
> > + nominal_freq <= 0 || min_freq > max_freq) {
> > + dev_err(dev,
> > + "min_freq(%d) or max_freq(%d) or nominal_freq(%d)
> value is incorrect\n",
> > + min_freq, max_freq, nominal_freq);
>
> The same with above.
>
> With that fixed, patch is Acked-by: Huang Rui <ray.huang@amd.com>
>
> Thanks,
> Ray

Thanks for the ACK.

Perry.


\
 
 \ /
  Last update: 2024-05-27 16:44    [W:0.890 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site