Messages in this thread | | | Date | Sun, 14 Apr 2024 15:30:56 +0200 | Subject | Re: [PATCH v3 3/4] arm64: dts: add description for solidrun cn9130 som and clearfog boards | From | Krzysztof Kozlowski <> |
| |
On 14/04/2024 15:02, Josua Mayer wrote: > Am 14.04.24 um 14:58 schrieb Josua Mayer: >> Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro >> reference boards. >> >> The SoM has been designed as a pin-compatible replacement for the older >> Armada 388 based SoM. Therefore it supports the same boards and a >> similar feature set. >> >> Most notable upgrades: >> - 4x Cortex-A72 >> - 10Gbps SFP >> - Both eMMC and SD supported at the same time >> >> The developer first supporting this product at SolidRun decided to use >> different filenames for the DTBs: Armada 388 uses the full >> "clearfog" string while cn9130 uses the abbreviation "cf". >> This name is already hard-coded in pre-installed vendor u-boot and can >> not be changed easily. >> >> NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: >> CN9130 SoM has a different footprint from Armada 388 SoM. >> Components on the carrier board below the SoM may collide causing >> damage, such as on Clearfog Base. >> >> Signed-off-by: Josua Mayer <josua@solid-run.com> >> --- > > Previous version had received an ack from Krzysztof Kozlowski, > which I dropped because I made additional changes. > > To simplify review, please find below > the incremental changes from v2 to v3:
If you send patches correctly, b4 gives diff, so no need for this diff here.
Best regards, Krzysztof
| |