lkml.org 
[lkml]   [2024]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: rockchip: remove startup-delay-us from vcc3v3_pcie2x1l0 on rock-5b
Hi,

On Wed, Apr 10, 2024 at 02:30:16PM +0800, Shawn Lin wrote:
> Hi Jianfeng,
>
> On 2024/4/1 16:13, Jianfeng Liu wrote:
> > Property startup-delay-us is copied from vendor dts and it will
> > make kernel not detect pcie wifi device. If I run command:
> > "echo 1 > /sys/bus/pci/rescan", pcie wifi device is detected, but
> > my wifi device RTL8822CE failed to load driver. Another device
> > RTL8723BE can load driver but no wifi signal is detected.
> >
> > Removing this property will fix issues above.
> >
> > Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
>
> startup-delay-us just make sure the power rail is stable before
> any action is taken to start the link, preventing the device from
> unable to work stably. So it shouldn't be the root cause I think.
>
> Could you help try this patch to checkout if it works for you?
>
> diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> index d684214..df30127 100644
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -167,7 +167,7 @@ static int rockchip_pcie_start_link(struct dw_pcie *pci)
> struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
>
> /* Reset device */
> - gpiod_set_value_cansleep(rockchip->rst_gpio, 0);
> + //gpiod_set_value_cansleep(rockchip->rst_gpio, 0);

Is this removal actually needed?

>
> rockchip_pcie_enable_ltssm(rockchip);
>
> @@ -180,7 +180,7 @@ static int rockchip_pcie_start_link(struct dw_pcie *pci)
> * We need more extra time as before, rather than setting just
> * 100us as we don't know how long should the device need to reset.
> */
> - msleep(100);
> + msleep(300);
> gpiod_set_value_cansleep(rockchip->rst_gpio, 1);
>
> return 0;
> @@ -311,6 +311,8 @@ static int rockchip_pcie_probe(struct platform_device
> *pdev)
> if (ret)
> return ret;
>
> + gpiod_set_value_cansleep(rockchip->rst_gpio, 0);

I suppose it makes sense to use GPIOD_OUT_LOW in
rockchip_pcie_resource_get(), so that the GPIO is requested low from
the start instead of being high for a very short amount of time.

Greetings,

-- Sebastian

> +
> /* DON'T MOVE ME: must be enable before PHY init */
> rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
>
>
>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > index d6bf2ee07..a9af654a0 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > @@ -76,7 +76,6 @@ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
> > regulator-boot-on;
> > regulator-min-microvolt = <3300000>;
> > regulator-max-microvolt = <3300000>;
> > - startup-delay-us = <50000>;
> > vin-supply = <&vcc5v0_sys>;
> > };
> >
> > --
> > 2.34.1
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2024-05-27 16:38    [W:0.136 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site