lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v12 4/7] drm/meson: gate px_clk when setting rate
Le mer. 3 avr. 2024 à 09:46, Neil Armstrong
<neil.armstrong@linaro.org> a écrit :
>
> Disable the px_clk when setting the rate to recover a fully
> configured and correctly reset VCLK clock tree after the rate
> is set.
>
> Fixes: 77d9e1e6b846 ("drm/meson: add support for MIPI-DSI transceiver")
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> index a6bc1bdb3d0d..a10cff3ca1fe 100644
> --- a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> @@ -95,6 +95,7 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
> return ret;
> }
>
> + clk_disable_unprepare(mipi_dsi->px_clk);
> ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
>
> if (ret) {
> @@ -103,6 +104,12 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
> return ret;
> }
>
> + ret = clk_prepare_enable(mipi_dsi->px_clk);
> + if (ret) {
> + dev_err(mipi_dsi->dev, "Failed to enable DSI Pixel clock (ret %d)\n", ret);
> + return ret;
> + }
> +
> switch (mipi_dsi->dsi_device->format) {
> case MIPI_DSI_FMT_RGB888:
> dpi_data_format = DPI_COLOR_24BIT;
>
> --
> 2.34.1
>

Looks good to me

Reviewed-by: Nicolas Belin <nbelin@baylibre.com>

\
 
 \ /
  Last update: 2024-05-27 16:32    [W:0.143 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site