lkml.org 
[lkml]   [2024]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2] net: phy: aquantia: add support for AQR114C PHY ID
Date
Add support for AQR114C PHY ID. This PHY advertise 10G speed:
SPEED(0x04): 0x6031
capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10
+100 +1000 -10-ts -2-tl +10g
EXTABLE(0x0B): 0x40fc
capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx
+100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g
+2.5g/5g -1000-h

but supports only up to 5G speed (as with AQR111/111B0).
AQR111 init config is used to set max speed 5G.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
---
drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 71bfddb8f453..d34cdec47636 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -28,6 +28,7 @@
#define PHY_ID_AQR412 0x03a1b712
#define PHY_ID_AQR113 0x31c31c40
#define PHY_ID_AQR113C 0x31c31c12
+#define PHY_ID_AQR114C 0x31c31c22
#define PHY_ID_AQR813 0x31c31cb2

#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
@@ -962,6 +963,25 @@ static struct phy_driver aqr_driver[] = {
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR114C),
+ .name = "Aquantia AQR114C",
+ .probe = aqr107_probe,
+ .get_rate_matching = aqr107_get_rate_matching,
+ .config_init = aqr111_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
.name = "Aquantia AQR813",
@@ -999,6 +1019,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
{ }
};
--
2.44.0

\
 
 \ /
  Last update: 2024-04-01 16:53    [W:0.343 / U:2.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site