lkml.org 
[lkml]   [2024]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt-bindings: net: add new property st,ext-phyclk in documentation for stm32
Date
Add property st,ext-phyclk to manage cases when PHY have no cristal/quartz
This property can be used with RMII phy without cristal 50Mhz and when we
want to select RCC clock instead of ETH_REF_CLK
Can be used also with RGMII phy with no cristal and we select RCC clock
instead of ETH_CLK125

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 80937b28fa046..529665d4fc911 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -85,6 +85,13 @@ properties:
phy-supply:
description: PHY regulator

+ st,ext-phyclk:
+ description:
+ set this property in RMII mode when you have PHY without crystal 50MHz and want to
+ select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
+ RCC clock instead of ETH_CLK125.
+ type: boolean
+
st,eth-clk-sel:
description:
set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
--
2.25.1

\
 
 \ /
  Last update: 2024-05-27 15:39    [W:0.270 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site