Messages in this thread | ![/](/images/icornerl.gif) | | Date | Mon, 4 Mar 2024 10:43:11 +0100 | Subject | Re: [PATCH v2] dt-bindings: display: atmel,lcdc: convert to dtschema | From | Krzysztof Kozlowski <> |
| |
On 04/03/2024 10:28, Dharma.B@microchip.com wrote: > On 04/03/24 1:06 pm, Krzysztof Kozlowski wrote: >> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe >> >> On 04/03/2024 06:36, Dharma Balasubiramani wrote: >>> Convert the atmel,lcdc bindings to DT schema. >>> Changes during conversion: add missing clocks and clock-names properties. >>> >>> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> >>> --- >>> This patch converts the existing lcdc display text binding to JSON schema. >>> The binding is split into two namely >>> lcdc.yaml >>> - Holds the frame buffer properties >>> lcdc-display.yaml >>> - Holds the display panel properties which is a phandle to the display >>> property in lcdc fb node. >>> >>> These bindings are tested against the existing at91 dts files using >>> dtbs_check. >>> --- >>> Changes in v2: >>> - Run checkpatch and remove whitespace errors. >>> - Add the standard interrupt flags. >>> - Split the binding into two, namely lcdc.yaml and lcdc-display.yaml. >>> - Link to v1: https://lore.kernel.org/r/20240223-lcdc-fb-v1-1-4c64cb6277df@microchip.com >>> --- >>> .../bindings/display/atmel,lcdc-display.yaml | 98 ++++++++++++++++++++++ >>> .../devicetree/bindings/display/atmel,lcdc.txt | 87 ------------------- >>> .../devicetree/bindings/display/atmel,lcdc.yaml | 70 ++++++++++++++++ >>> 3 files changed, 168 insertions(+), 87 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml >>> new file mode 100644 >>> index 000000000000..ea4fd34b9e2c >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml >>> @@ -0,0 +1,98 @@ >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Microchip's LCDC Display >>> + >>> +maintainers: >>> + - Nicolas Ferre <nicolas.ferre@microchip.com> >>> + - Dharma Balasubiramani <dharma.b@microchip.com> >>> + >>> +description: >>> + The LCD Controller (LCDC) consists of logic for transferring LCD image data >>> + from an external display buffer to a TFT LCD panel. The LCDC has one display >>> + input buffer per layer that fetches pixels through the single bus host >>> + interface and a look-up table to allow palletized display configurations. The >>> + LCDC is programmable on a per layer basis, and supports different LCD >>> + resolutions, window sizes, image formats and pixel depths. >>> + >>> +# We need a select here since this schema is applicable only for nodes with the >>> +# following properties >>> + >>> +select: >>> + anyOf: >>> + - required: [ 'atmel,dmacon' ] >>> + - required: [ 'atmel,lcdcon2' ] >>> + - required: [ 'atmel,guard-time' ] >>> + - required: [ bits-per-pixel ] >> >> Why quotes in other places? > > I got the following warnings when I tried to compile without adding the > quotes for atmel,* > > "[warning] too few spaces after comma (commas)"
Ah, right, because it is a list. Looks fine.
> > and when I add quotes for "bits-per-pixel" it complained the following > > "[error] string value is redundantly quoted with any quotes > (quoted-strings)"
Yep, right.
> > So I added quotes for properties with comma in them. > >> bits-per-pixel is generic property, so you >> are now selecting other bindings. Read carefully what Rob wrote. > > My bad, I should have inquired before arriving at any conclusion. > Thanks for letting me know. > > Shall I send v3 by removing "- required: [ bits-per-pixel ]" in select?
Yes... and test entire bindings, not only your schema.
Best regards, Krzysztof
| ![\](/images/icornerr.gif) |