lkml.org 
[lkml]   [2024]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers: rtc: rv3028: check and update PORF flag during probe
On 29/03/2024 15:49:40+0530, Karthikeyan Krishnasamy wrote:
> PORF flag is set during power reset and voltage drop below Vpor
> data in rtc device is no longer valid if PORF flag is set
> and software must reset to 0, in order to perform sanity
> check on rtc data
>
> Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
> ---
> drivers/rtc/rtc-rv3028.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c
> index 2f001c59c61d..e9699ff0c4e8 100644
> --- a/drivers/rtc/rtc-rv3028.c
> +++ b/drivers/rtc/rtc-rv3028.c
> @@ -951,6 +951,13 @@ static int rv3028_probe(struct i2c_client *client)
> if (ret < 0)
> return ret;
>
> + if (status & RV3028_STATUS_PORF) {
> + ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
> + RV3028_STATUS_PORF, 0);
> + if (ret < 0)
> + return ret;
> + }
> +

This breaks the workflow, you must set the time to reset PORF.

> if (status & RV3028_STATUS_AF)
> dev_warn(&client->dev, "An alarm may have been missed.\n");
>
> --
> 2.34.1
>

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2024-05-27 16:15    [W:0.098 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site