Messages in this thread | | | Date | Mon, 18 Mar 2024 09:04:22 -0500 | Subject | Re: [PATCH v3 1/7] mmc: sdhci_am654: Add tuning algorithm for delay chain | From | Judith Mendez <> |
| |
Hi Adrian,
On 3/14/24 9:18 AM, Adrian Hunter wrote: > On 8/03/24 02:57, Judith Mendez wrote: >> Currently the sdhci_am654 driver only supports one tuning >> algorithm which should be used only when DLL is enabled. The >> ITAPDLY is selected from the largest passing window and the >> buffer is viewed as a circular buffer. >> >> The new algorithm should be used when the delay chain >> is enabled. The ITAPDLY is selected from the largest passing >> window and the buffer is not viewed as a circular buffer. >> >> This implementation is based off of the following paper: [1]. >> >> Also add support for multiple failing windows. >> >> [1] https://www.ti.com/lit/an/spract9/spract9.pdf >> >> Fixes: 13ebeae68ac9 ("mmc: sdhci_am654: Add support for software tuning") >> Signed-off-by: Judith Mendez <jm@ti.com> > > One question further below, and one cosmetic change, but resolve > those and you may add to all patches in this patch set:
Appreciate your review, thanks.
> > Acked-by: Adrian Hunter <adrian.hunter@intel.com> > >> --- >> Changelog: >> v2->v3: >> - Fix return for tuning algorithm >> - Fix ITAPDLY_LAST_INDEX >> - Use reverse fir tree order for variable declarations >> - Remove unnecessary parenthesis >> --- >> drivers/mmc/host/sdhci_am654.c | 112 +++++++++++++++++++++++++++------ >> 1 file changed, 92 insertions(+), 20 deletions(-) >> >> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c >> index d659c59422e1..d11b0d769e6c 100644 >> --- a/drivers/mmc/host/sdhci_am654.c >> +++ b/drivers/mmc/host/sdhci_am654.c >> @@ -149,10 +149,17 @@ struct sdhci_am654_data { >> int strb_sel; >> u32 flags; >> u32 quirks; >> + bool dll_enable; >> >> #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0) >> }; >> >> +struct window { >> + u8 start; >> + u8 end; >> + u8 length; >> +}; >> + >> struct sdhci_am654_driver_data { >> const struct sdhci_pltfm_data *pdata; >> u32 flags; >> @@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) >> >> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); >> >> - if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) >> + if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) { >> sdhci_am654_setup_dll(host, clock); >> - else >> + sdhci_am654->dll_enable = true; >> + } else { >> sdhci_am654_setup_delay_chain(sdhci_am654, timing); > > V2 patch had here: > > sdhci_am654->dll_enable = false; > > Was its removal intended?
I did remove on purpose since it did not seem to be necessary.
> >> + } >> >> regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK, >> sdhci_am654->clkbuf_sel); >> @@ -408,39 +417,102 @@ static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask) >> return 0; >> } >> >> -#define ITAP_MAX 32 >> +#define ITAPDLY_LENGTH 32 >> +#define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1) >> + >> +static u32 sdhci_am654_calculate_itap(struct sdhci_host *host, struct window >> + *fail_window, u8 num_fails, bool circular_buffer) >> +{ >> + u8 itap = 0, start_fail = 0, end_fail = 0, pass_length = 0; >> + u8 first_fail_start = 0, last_fail_end = 0; >> + struct device *dev = mmc_dev(host->mmc); >> + struct window pass_window = {0, 0, 0}; >> + int prev_fail_end = -1; >> + > > Unnecessary blank line
Will remove for v4.
> >> + u8 i; >> + >> + if (!num_fails) >> + return ITAPDLY_LAST_INDEX >> 1; >> + >> + if (fail_window->length == ITAPDLY_LENGTH) { >> + dev_err(dev, "No passing ITAPDLY, return 0\n"); >> + return 0; >> + } >> + >> + first_fail_start = fail_window->start; >> + last_fail_end = fail_window[num_fails - 1].end; >> + >> + for (i = 0; i < num_fails; i++) { >> + start_fail = fail_window[i].start; >> + end_fail = fail_window[i].end; >> + pass_length = start_fail - (prev_fail_end + 1); >> + >> + if (pass_length > pass_window.length) { >> + pass_window.start = prev_fail_end + 1; >> + pass_window.length = pass_length; >> + } >> + prev_fail_end = end_fail; >> + } >> + >> + if (!circular_buffer) >> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end; >> + else >> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end + first_fail_start; >> + >> + if (pass_length > pass_window.length) { >> + pass_window.start = last_fail_end + 1; >> + pass_window.length = pass_length; >> + } >> + >> + if (!circular_buffer) >> + itap = pass_window.start + (pass_window.length >> 1); >> + else >> + itap = (pass_window.start + (pass_window.length >> 1)) % ITAPDLY_LENGTH; >> + >> + return (itap > ITAPDLY_LAST_INDEX) ? ITAPDLY_LAST_INDEX >> 1 : itap; >> +} >> + >> static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host, >> u32 opcode) >> { >> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); >> struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host); >> - int cur_val, prev_val = 1, fail_len = 0, pass_window = 0, pass_len; >> - u32 itap; >> + struct window fail_window[ITAPDLY_LENGTH]; >> + u8 curr_pass, itap; >> + u8 fail_index = 0; >> + u8 prev_pass = 1; >> + >> + memset(fail_window, 0, sizeof(fail_window)); >> >> /* Enable ITAPDLY */ >> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK, >> 1 << ITAPDLYENA_SHIFT); >> >> - for (itap = 0; itap < ITAP_MAX; itap++) { >> + for (itap = 0; itap < ITAPDLY_LENGTH; itap++) { >> sdhci_am654_write_itapdly(sdhci_am654, itap); >> >> - cur_val = !mmc_send_tuning(host->mmc, opcode, NULL); >> - if (cur_val && !prev_val) >> - pass_window = itap; >> + curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL); >> >> - if (!cur_val) >> - fail_len++; >> + if (!curr_pass && prev_pass) >> + fail_window[fail_index].start = itap; >> >> - prev_val = cur_val; >> + if (!curr_pass) { >> + fail_window[fail_index].end = itap; >> + fail_window[fail_index].length++; >> + } >> + >> + if (curr_pass && !prev_pass) >> + fail_index++; >> + >> + prev_pass = curr_pass; >> } >> - /* >> - * Having determined the length of the failing window and start of >> - * the passing window calculate the length of the passing window and >> - * set the final value halfway through it considering the range as a >> - * circular buffer >> - */ >> - pass_len = ITAP_MAX - fail_len; >> - itap = (pass_window + (pass_len >> 1)) % ITAP_MAX; >> + >> + if (fail_window[fail_index].length != 0) >> + fail_index++; >> + >> + itap = sdhci_am654_calculate_itap(host, fail_window, fail_index, >> + sdhci_am654->dll_enable); >> + >> sdhci_am654_write_itapdly(sdhci_am654, itap); >> >> return 0; >
| |