lkml.org 
[lkml]   [2024]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] arm64: dts: qcom: sm8450: Fix the msi-map entries
On 18/03/2024 08:19, Manivannan Sadhasivam wrote:
> While adding the GIC ITS MSI support, it was found that the msi-map entries
> needed to be swapped to receive MSIs from the endpoint.
>
> But later it was identified that the swapping was needed due to a bug in
> the Qualcomm PCIe controller driver. And since the bug is now fixed with
> commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
> let's fix the msi-map entries also to reflect the actual mapping in the
> hardware.
>
> Cc: <stable@vger.kernel.org> # 6.3: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly")
> Fixes: ff384ab56f16 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 16 ++++------------
> 1 file changed, 4 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index b86be34a912b..024d2653cc30 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1777,12 +1777,8 @@ pcie0: pcie@1c00000 {
> ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
> <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
>
> - /*
> - * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
> - * Hence, the IDs are swapped.
> - */
> - msi-map = <0x0 &gic_its 0x5981 0x1>,
> - <0x100 &gic_its 0x5980 0x1>;
> + msi-map = <0x0 &gic_its 0x5980 0x1>,
> + <0x100 &gic_its 0x5981 0x1>;
> msi-map-mask = <0xff00>;
> interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> @@ -1900,12 +1896,8 @@ pcie1: pcie@1c08000 {
> ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
>
> - /*
> - * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
> - * Hence, the IDs are swapped.
> - */
> - msi-map = <0x0 &gic_its 0x5a01 0x1>,
> - <0x100 &gic_its 0x5a00 0x1>;
> + msi-map = <0x0 &gic_its 0x5a00 0x1>,
> + <0x100 &gic_its 0x5a01 0x1>;
> msi-map-mask = <0xff00>;
> interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2024-05-27 15:52    [W:0.075 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site