lkml.org 
[lkml]   [2024]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] ahci: asm1064: asm1166: don't limit reported ports
From
Hi,

On 3/13/24 10:46 PM, Conrad Kostecki wrote:
> Previously, patches have been added to limit the reported count of SATA
> ports for asm1064 and asm1166 SATA controllers, as those controllers do
> report more ports than physical having.
>
> Unfortunately, this causes trouble for users, which are using SATA
> controllers, which provide more ports through SATA PMP
> (Port-MultiPlier) and are now not any more recognized.
>
> This happens, as asm1064 and 1166 are handling SATA PMP transparently,
> so all non-physical ports needs to be enabled to use that feature.
>
> This patch reverts both patches for asm1064 and asm1166, so old
> behavior is restored and SATA PMP will work again, so all physical and
> non-physical ports will work again.
>
> Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports")
> Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports")
> Cc: stable@vger.kernel.org
> Reported-by: Matt <cryptearth@googlemail.com>
> Signed-off-by: Conrad Kostecki <conikost@gentoo.org>

Thank you for the quick patch, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans







> ---
> drivers/ata/ahci.c | 13 -------------
> 1 file changed, 13 deletions(-)
>
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index 78570684ff68..562302e2e57c 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -669,19 +669,6 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets");
> static void ahci_pci_save_initial_config(struct pci_dev *pdev,
> struct ahci_host_priv *hpriv)
> {
> - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) {
> - switch (pdev->device) {
> - case 0x1166:
> - dev_info(&pdev->dev, "ASM1166 has only six ports\n");
> - hpriv->saved_port_map = 0x3f;
> - break;
> - case 0x1064:
> - dev_info(&pdev->dev, "ASM1064 has only four ports\n");
> - hpriv->saved_port_map = 0xf;
> - break;
> - }
> - }
> -
> if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
> dev_info(&pdev->dev, "JMB361 has only one port\n");
> hpriv->saved_port_map = 1;


\
 
 \ /
  Last update: 2024-03-13 23:07    [W:0.034 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site