lkml.org 
[lkml]   [2024]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630
Date


> -----Original Message-----
> From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> Sent: Wednesday, March 13, 2024 10:42 AM
> To: patrick@stwcx.xyz; Andrew Jeffery <andrew@codeconstruct.com.au>; Linus
> Walleij <linus.walleij@linaro.org>; Joel Stanley <joel@jms.id.au>
> Cc: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>;
> linux-aspeed@lists.ozlabs.org; openbmc@lists.ozlabs.org;
> linux-gpio@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org
> Subject: [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630
>
> Description:
> Correct the offset of "Disable GPIO Internal Pull-Down #4" register that should
> be 630h according to the AST2620 datasheet.
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---

Hi,
Please don't review this patch since ASPEED also provided the patch to
fix this issue.
Thanks!

\
 
 \ /
  Last update: 2024-03-13 07:57    [W:0.037 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site