lkml.org 
[lkml]   [2024]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] spi: spi-imx: fix off-by-one in mx51 CPU mode burst length
From
From: Adam Butcher <adam@jessamine.co.uk>

[Apologies, rubbish mailer corrupted the previous re-addressed post]

992e1211dc91 ("spi: imx: fix the burst length at DMA mode and CPU mode")
corrects three cases of setting the ECSPI burst length but erroneously
leaves the in-range CPU case one bit to big (in that register a value of
0 means 1 bit). The effect was that transmissions that should have been
8-bit bytes appeared as 9-bit causing failed communication with SPI
devices.

It seems the original patch submission up to v4 did not contain the bug.
It was introduced in the v5 update.

Link: https://lore.kernel.org/all/20240201105451.507005-1-carlos.song@nxp.com/
Link: https://lore.kernel.org/all/20240204091912.36488-1-carlos.song@nxp.com/
Fixes: 992e1211dc91 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Signed-off-by: Adam Butcher <adam@jessamine.co.uk>
---
drivers/spi/spi-imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7c1fcd5ed52f7..100552e6c56bc 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -743,8 +743,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1)
<< MX51_ECSPI_CTRL_BL_OFFSET;
else
- ctrl |= spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
- BITS_PER_BYTE) * spi_imx->bits_per_word
+ ctrl |= (spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
+ BITS_PER_BYTE) * spi_imx->bits_per_word - 1)
<< MX51_ECSPI_CTRL_BL_OFFSET;
}
}
--
2.43.0




\
 
 \ /
  Last update: 2024-03-13 20:05    [W:0.029 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site