Messages in this thread | | | From | Jernej Škrabec <> | Subject | Re: [PATCH 0/3] dts: arm64: sunxi: add initial support for t95 tv box | Date | Wed, 13 Mar 2024 19:00:06 +0100 |
| |
Dne sreda, 13. marec 2024 ob 18:38:08 CET je Andre Przywara napisal(a): > On Wed, 13 Mar 2024 18:25:14 +0100 > Jernej Škrabec <jernej.skrabec@gmail.com> wrote: > > > Hi Kamil! > > > > Dne ponedeljek, 11. marec 2024 ob 18:47:47 CET je Kamil Kasperski napisal(a): > > > T95 is a most commonly known for being a box with a pre-installed malware. > > > It uses Allwinner H616 and comes with eMMC and DDR3 memory. > > > This device comes with two versions - one with AXP305 PMIC and another with AXP313 PMIC. > > > > I have this board and it always felt like a clone of X96 Mate, which is > > already supported in kernel, except for broken sd card detection. Would it > > make sense to unify those two boards and just overwrite or update parts here > > that are not the same? > > I think the box you have is an older one, with the AXP305? IIUC, this is > about a newer revision with the AXP313. There are quite some differences > between the two PMICs, though it might still make sense to share the DTs, > see the OrangePi Zero[23].
Right, mine is with AXP305. It has "T95MAX v4.0" printed on PCB.
Kamil, does your board also have "MAX" mentioned somewhere?
Best regards, Jernej
> > Cheers, > Andre > > > > Kamil Kasperski (3): > > > dt-bindings: vendor-prefixes: sunxi: add T95 to vendor-prefixes > > > dt-bindings: arm: sunxi: add t95 compatible string to list of known > > > boards > > > dts: arm64: sunxi: add initial support for T95 AXP313 tv box > > > > > > .../devicetree/bindings/arm/sunxi.yaml | 5 + > > > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > .../dts/allwinner/sun50i-h616-t95-axp313.dts | 138 ++++++++++++++++++ > > > 4 files changed, 146 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-t95-axp313.dts > > > > > > > > > > > > > > > > > >
| |