Messages in this thread | | | Date | Tue, 12 Mar 2024 21:37:49 +0100 | Subject | Re: [PATCH v2 2/2] arm64: dts: qcom: add TP-Link Archer AX55 v1 | From | Konrad Dybcio <> |
| |
On 2/26/24 18:12, Gabor Juhos wrote: > Add device tree source for the TP-Link Archer AX55 v1 [1] > which is a dual-band WiFi router based on the IPQ5018 SoC. > > At the moment, only the UART, the GPIO LEDs and buttons > are usable, but it makes it possible to boot an initramfs > image on the device. > > The device tree can be extended in the future, once support > for other periherals will be available for the platform. > > 1. https://www.tp-link.com/en/home-networking/wifi-router/archer-ax55/v1/ > > Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> > ---
[...]
> + > +&uart1_pins { > + /* > + * Remove "gpio31" from the default pins in order to be able > + * to use that for the WPS button. > + */ > + pins = "gpio32", "gpio33", "gpio34";
I believe you can even shorten it down to gpio32/33, 4pin uart screams flow control, and I'm not sure if it's there only one-way
Konrad
| |