Messages in this thread | | | Date | Mon, 11 Mar 2024 11:18:09 -0500 | Subject | Re: [PATCH 1/2] scsi: target: iscsi: handle SCSI immediate commands | From | michael.christie@oracle ... |
| |
On 12/7/23 11:42 AM, lduncan@suse.com wrote: > From: Lee Duncan <lduncan@suse.com> > > Some iSCSI initiators send SCSI PDUs with the "immediate" bit > set, and this is allowed according to RFC 3720. Commands with > the "Immediate" bit set are called "immediate commands". From > section 3.2.2.1. "Command Numbering and Acknowledging": > > The target MUST NOT transmit a MaxCmdSN that is less than > ExpCmdSN-1. For non-immediate commands, the CmdSN field can take any > value from ExpCmdSN to MaxCmdSN inclusive. The target MUST silently > ignore any non-immediate command outside of this range or non- > immediate duplicates within the range. The CmdSN carried by > immediate commands may lie outside the ExpCmdSN to MaxCmdSN range. > For example, if the initiator has previously sent a non-immediate > command carrying the CmdSN equal to MaxCmdSN, the target window is > closed. For group task management commands issued as immediate > commands, CmdSN indicates the scope of the group action (e.g., on > ABORT TASK SET indicates which commands are aborted). > > This fixed an issue with fastlinq qedi Converged Network Adapter > initiator firmware, trying to use an LIO target for booting. These > changes made booting possible, with or without ImmediateData enabled. >
This is taking me a really long time to review because I've never looked at some of these code paths.
Have you tested the error cases?
What happens for a scsi command that's marked with the immediate bit and: 1. We get an abort and 1.A The scsi command has completed? 1.B The scsi command is being completed?
For example, if the command we want to abort is not in the window, does iscsit_find_cmd_from_itt just not find the command and do we just return ISCSI_TMF_RSP_NO_TASK so the initiator will just escalate to lun reset.
2. For lun reset and abort, if the scsi command we want to abort/reset is not in the window (let's say it's cmdsn is higher than max_cmd_sn), does the iscsi layer complete the scsi command then complete the TMF or if the TMF has a lower cmdsn than the scsi command does the iscsi layer complete the scsi command then the TMF?
3. What happens for 1 and 2 and ERL 2 is used so we have ISCSI_TM_FUNC_TASK_REASSIGN and maybe are hitting the out of order code as well? Does it work ok?
| |