lkml.org 
[lkml]   [2024]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema
From
Hi Krzysztof,

Le 29/02/2024 à 20:15, Krzysztof Kozlowski a écrit :
> On 26/02/2024 08:48, Raphael Gallais-Pou wrote:
>> Converts st,stih407-thermal binding to DT schema format and cleans
>
> Please use imperative for your future patches.
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
>> unused property "st,passive_cooling_temp" which does not appear in the
>> device-tree.
>>
>> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
>> ---
>> .../bindings/thermal/st,stih407-thermal.yaml | 61 ++++++++++++++++++++++
>> .../devicetree/bindings/thermal/st-thermal.txt | 32 ------------
>> 2 files changed, 61 insertions(+), 32 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
>> new file mode 100644
>> index 000000000000..807f8d77edf5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
>> @@ -0,0 +1,61 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: STMicroelectronics STi digital thermal sensor (DTS)
>> +
>> +maintainers:
>> + - Patrice Chotard <patrice.chotard@foss.st.com>
>> + - Lee Jones <lee@kernel.org>
>> +
>> +description:
>> + Binding for Thermal Sensor device for STMicroelectronics STi SoCs series.
>
> Drop "Binding for" and describe the hardware. If you repeat the title,
> then the description is not really needed.
>
>> +
>> +allOf:
>> + - $ref: thermal-sensor.yaml
>> +
>> +properties:
>> + compatible:
>> + const: st,stih407-thermal
>> +
>> + clocks:
>> + maxItems: 1
>> + description: Phandle of the clock used by the thermal sensor.
>
> Drop description, it's obvious.
>
>> +
>> + clock-names:
>> + items:
>> + - const: thermal
>> +
>> + reg:
>> + description:
>> + For non-sysconf based sensors, this should be the physical base
>> + address and length of the sensor's registers.
>
> That's odd, probably old binding was incomplete. You have only one
> device described here, so I expect this to be always present (thus
> description is obvious).

It is indeed missing in the old file.
>
>> +
>> + interrupts:
>> + description: |
>
> Do not need '|' unless you need to preserve formatting.
>
>> + Standard way to define interrupt number.
>
> ???
>
>> + For thermal sensor's for which no interrupt has been
>> + defined, a polling delay of 1000ms will be used to read the
>> + temperature from device.
>
> Missing thermal-sensor-cells.
>
>> +
>> +required:
>> + - compatible
>> + - clocks
>> + - clock-names
>
> Missing reg and please mention the change from pure conversion in commit
> msg.
>
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + temp0@91a0000 {
>
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
>
>> + compatible = "st,stih407-thermal";
>> + reg = <0x91a0000 0x28>;
>> + clock-names = "thermal";
>> + clocks = <&CLK_SYSIN>;
>> + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
>> + #thermal-sensor-cells = <0>;
>> + };
>
>
>
Thanks for your review. I will send a v2 with the changes your mentioned
above.

Regards,
Raphaël

> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2024-03-01 17:58    [W:0.151 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site