lkml.org 
[lkml]   [2024]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
From
Thanks Steev,

On 05/02/2024 08:09, Johan Hovold wrote:
> On Sun, Feb 04, 2024 at 11:30:54PM -0600, Steev Klimaszewski wrote:
>> On Mon, Jan 29, 2024 at 8:27 AM Krzysztof Kozlowski
>> <krzysztof.kozlowski@linaro.org> wrote:
>
>>> so I will go with that approach. Please ignore this DTS patch. I will
>>> send ASoC changes which won't affect sc8280xp.
>
>> I somehow missed that patchset or conversation; As an owner of an
>> X13s, which is sc8280xp, I can say, neither pre-dts patch, nor post,
>> seem to do much good. When I attempt to do a voice chat in armcord,
>> the responses I get to how I sound when using the mic on the X13s
>> itself range from "You sound like hot trash" to "You sound like a
>> robot with hiccups".

does arecord exhibit same issue?

What is your setup looking like? I would like to reproduce this on my x13s.

thanks,
Srini
>
> That's a separate issue entirely. Both the digital and analog microphone
> (jack) is working on the X13s as long as you use pulseaudio.
>
> As I've mentioned before, there are problems with both playback and
> capture when you use pipewire however ("robot with hiccups" one could
> indeed describe it as).
>
> That suggests a more general problem with the Qualcomm audio drivers,
> but that has nothing to do with the audio routing.
>
> Johan

\
 
 \ /
  Last update: 2024-05-27 14:52    [W:0.047 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site