lkml.org 
[lkml]   [2024]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/5] dt-bindings: fpga: xlnx,fpga-slave-serial: rename gpios
Date
By convention, gpio consumer names should not contain underscores
(prog_b here) and shouldn't contain active low suffixes (-b here).

Signed-off-by: Charles Perry <charles.perry@savoirfairelinux.com>
---
.../bindings/fpga/xlnx,fpga-slave-serial.yaml | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
index 614d86ad825f3..650a4d8792b64 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
@@ -36,7 +36,7 @@ properties:
reg:
maxItems: 1

- prog_b-gpios:
+ prog-gpios:
description:
config pin (referred to as PROGRAM_B in the manual)
maxItems: 1
@@ -46,7 +46,7 @@ properties:
config status pin (referred to as DONE in the manual)
maxItems: 1

- init-b-gpios:
+ init-gpios:
description:
initialization status and configuration error pin
(referred to as INIT_B in the manual)
@@ -55,9 +55,9 @@ properties:
required:
- compatible
- reg
- - prog_b-gpios
+ - prog-gpios
- done-gpios
- - init-b-gpios
+ - init-gpios

additionalProperties: false

@@ -72,8 +72,8 @@ examples:
spi-max-frequency = <60000000>;
spi-cpha;
reg = <0>;
- prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ prog-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ init-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
--
2.43.0

\
 
 \ /
  Last update: 2024-05-27 14:53    [W:0.102 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site