lkml.org 
[lkml]   [2024]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH RFT 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add mode-switch
The QMP USB3/DP Combo PHY can work in 3 modes:
- DisplayPort Only
- USB3 Only
- USB3 + DisplayPort Combo mode

In order to switch between those modes, the PHY needs to receive
Type-C events, allow marking to the phy with the mode-switch
property in order to allow the PHY to Type-C events.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 2d0d7e9e6431..49c6539b9df0 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -71,6 +71,11 @@ properties:
description:
See include/dt-bindings/phy/phy-qcom-qmp.h

+ mode-switch:
+ description:
+ Flag the PHY as possible handler of USB Type-C altmode switching
+ type: boolean
+
orientation-switch:
description:
Flag the PHY as possible handler of USB Type-C orientation switching
--
2.34.1


\
 
 \ /
  Last update: 2024-05-27 15:28    [W:0.229 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site