lkml.org 
[lkml]   [2024]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] ARM: dts: imx7: remove DSI port endpoints
On Fri, Feb 23, 2024 at 06:19:01PM +0100, Francesco Dolcini wrote:
> On Fri, Feb 16, 2024 at 11:42:55AM +0100, Francesco Dolcini wrote:
> > From: Francesco Dolcini <francesco.dolcini@toradex.com>
> >
> > This fixes the display not working on colibri imx7, the driver fails to
> > load with the following error:
> >
> > mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge
> >
> > NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
> > MIPI DSI IP block, currently it's not possible to describe the
> > connection to both.
> >
> > Remove the port endpoint from the SOC dtsi to prevent regressions, this
> > would need to be defined on the board DTS.
> >
> > Reported-by: Hiago De Franco <hiagofranco@gmail.com>
> > Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
> > Fixes: edbbae7fba49 ("ARM: dts: imx7: add MIPI-DSI support")
> > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
>
> Hello Shawn, what do you plan to do with this?
>
> This fixes a regression from v6.8-rc1 and would be nice to have it into
> the final v6.8.

Applied as a fix for 6.8, thanks!


\
 
 \ /
  Last update: 2024-05-27 15:20    [W:0.104 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site