Messages in this thread Patch in this message | | | From | Jérémie Dautheribes <> | Subject | [PATCH net-next 1/3] dt-bindings: net: dp83822: support configuring RMII master/slave mode | Date | Thu, 22 Feb 2024 11:31:15 +0100 |
| |
Add property ti,rmii-mode to support selecting the RMII operation mode between: - master mode (PHY operates from a 25MHz clock reference) - slave mode (PHY operates from a 50MHz clock reference)
If not set, the operation mode is configured by hardware straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> --- .../devicetree/bindings/net/ti,dp83822.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index 8f4350be689c..8f23254c0458 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -80,6 +80,22 @@ properties: 10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000] default: 10000 + ti,rmii-mode: + description: | + If present, select the RMII operation mode. Two modes are + available: + - RMII master, where the PHY operates from a 25MHz clock reference, + provided by a crystal or a CMOS-level oscillator + - RMII slave, where the PHY operates from a 50MHz clock reference, + provided by a CMOS-level oscillator + The RMII operation mode can also be configured by its straps. + If the strap pin is not set correctly or not set at all, then this can be + used to configure it. + $ref: /schemas/types.yaml#/definitions/string + enum: + - master + - slave + required: - reg -- 2.34.1
| |