lkml.org 
[lkml]   [2024]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/6] uio_hv_generic: Enable interrupt for low speed VMBus devices
Date
Hyper-V is adding some "specialty" synthetic devices. Instead of writing
new kernel-level VMBus drivers for these devices, the devices will be
presented to user space via this existing Hyper-V generic UIO driver, so
that a user space driver can handle the device. Since these new synthetic
devices are low speed devices, they don't support monitor bits and we must
use vmbus_setevent() to enable interrupts from the host.

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
---
drivers/uio/uio_hv_generic.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index 4bda6b52e49e..289611c7dfd7 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -84,6 +84,9 @@ hv_uio_irqcontrol(struct uio_info *info, s32 irq_state)
dev->channel->inbound.ring_buffer->interrupt_mask = !irq_state;
virt_mb();

+ if (!dev->channel->offermsg.monitor_allocated && irq_state)
+ vmbus_setevent(dev->channel);
+
return 0;
}

@@ -240,12 +243,6 @@ hv_uio_probe(struct hv_device *dev,
int ret;
size_t ring_size = hv_dev_ring_size(channel);

- /* Communicating with host has to be via shared memory not hypercall */
- if (!channel->offermsg.monitor_allocated) {
- dev_err(&dev->device, "vmbus channel requires hypercall\n");
- return -ENOTSUPP;
- }
-
if (!ring_size)
ring_size = HV_RING_SIZE * PAGE_SIZE;

--
2.34.1

\
 
 \ /
  Last update: 2024-05-27 15:09    [W:0.161 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site