lkml.org 
[lkml]   [2024]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] spi: dw: Add a number of native CS auto-detection
Date
Aside with the FIFO depth and DFS field size it's possible to auto-detect
a number of native chip-select synthesized in the DW APB/AHB SSI IP-core.
It can be done just by writing ones to the SER register. The number of
writable flags in the register is limited by the SSI_NUM_SLAVES IP-core
synthesize parameter. All the upper flags are read-only and wired to zero.
Based on that let's add the number of native CS auto-detection procedure
so the low-level platform drivers wouldn't need to manually set it up
unless it's required to set a constraint due to platform-specific reasons
(for instance, due to a hardware bug).

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
drivers/spi/spi-dw-core.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 722b5eb1f709..ddfdb903047a 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -834,6 +834,20 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws)
DW_SPI_GET_BYTE(dws->ver, 1));
}

+ /*
+ * Try to detect the number of native chip-selects if the platform
+ * driver didn't set it up. There can be up to 16 lines configured.
+ */
+ if (!dws->num_cs) {
+ u32 ser;
+
+ dw_writel(dws, DW_SPI_SER, 0xffff);
+ ser = dw_readl(dws, DW_SPI_SER);
+ dw_writel(dws, DW_SPI_SER, 0);
+
+ dws->num_cs = hweight16(ser);
+ }
+
/*
* Try to detect the FIFO depth if not set by interface driver,
* the depth could be from 2 to 256 from HW spec
--
2.43.0

\
 
 \ /
  Last update: 2024-05-27 15:05    [W:2.338 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site