lkml.org 
[lkml]   [2024]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.15 04/19] xhci: fix possible null pointer deref during xhci urb enqueue
Date
From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit e2e2aacf042f52854c92775b7800ba668e0bdfe4 ]

There is a short gap between urb being submitted and actually added to the
endpoint queue (linked). If the device is disconnected during this time
then usb core is not yet aware of the pending urb, and device may be freed
just before xhci_urq_enqueue() continues, dereferencing the freed device.

Freeing the device is protected by the xhci spinlock, so make sure we take
and keep the lock while checking that device exists, dereference it, and
add the urb to the queue.

Remove the unnecessary URB check, usb core checks it before calling
xhci_urb_enqueue()

Suggested-by: Kuen-Han Tsai <khtsai@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/xhci.c | 40 +++++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5c9d3be136d2..6c8c9cbcd05d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1644,24 +1644,7 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
struct urb_priv *urb_priv;
int num_tds;

- if (!urb)
- return -EINVAL;
- ret = xhci_check_args(hcd, urb->dev, urb->ep,
- true, true, __func__);
- if (ret <= 0)
- return ret ? ret : -EINVAL;
-
- slot_id = urb->dev->slot_id;
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
- ep_state = &xhci->devs[slot_id]->eps[ep_index].ep_state;
-
- if (!HCD_HW_ACCESSIBLE(hcd))
- return -ESHUTDOWN;
-
- if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
- xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
- return -ENODEV;
- }

if (usb_endpoint_xfer_isoc(&urb->ep->desc))
num_tds = urb->number_of_packets;
@@ -1700,12 +1683,35 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag

spin_lock_irqsave(&xhci->lock, flags);

+ ret = xhci_check_args(hcd, urb->dev, urb->ep,
+ true, true, __func__);
+ if (ret <= 0) {
+ ret = ret ? ret : -EINVAL;
+ goto free_priv;
+ }
+
+ slot_id = urb->dev->slot_id;
+
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
+ ret = -ESHUTDOWN;
+ goto free_priv;
+ }
+
+ if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+ xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+ ret = -ENODEV;
+ goto free_priv;
+ }
+
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
urb->ep->desc.bEndpointAddress, urb);
ret = -ESHUTDOWN;
goto free_priv;
}
+
+ ep_state = &xhci->devs[slot_id]->eps[ep_index].ep_state;
+
if (*ep_state & (EP_GETTING_STREAMS | EP_GETTING_NO_STREAMS)) {
xhci_warn(xhci, "WARN: Can't enqueue URB, ep in streams transition state %x\n",
*ep_state);
--
2.43.0

\
 
 \ /
  Last update: 2024-05-27 14:37    [W:0.079 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site