lkml.org 
[lkml]   [2024]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v7 22/22] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.

Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 2 --
1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 4b35b1fd4b58..eb0eb2af6041 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -589,7 +589,6 @@ acc0: clock-controller@2088000 {
saw0: power-manager@2089000 {
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
};

acc1: clock-controller@2098000 {
@@ -604,7 +603,6 @@ acc1: clock-controller@2098000 {
saw1: power-manager@2099000 {
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
};

nss_common: syscon@3000000 {
--
2.39.2


\
 
 \ /
  Last update: 2024-01-02 06:24    [W:0.100 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site