lkml.org 
[lkml]   [2024]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 04/12] arm64: dts: qcom: sdm845: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c2244824355a..1c2d01f0cf07 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4760,6 +4760,7 @@ gpu: gpu@5000000 {
operating-points-v2 = <&gpu_opp_table>;

qcom,gmu = <&gmu>;
+ #cooling-cells = <2>;

interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
@@ -5602,8 +5603,15 @@ gpu-top-thermal {

thermal-sensors = <&tsens0 11>;

+ cooling-maps {
+ map0 {
+ trip = <&gpu_top_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu1_alert0: trip-point0 {
+ gpu_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -5617,8 +5625,15 @@ gpu-bottom-thermal {

thermal-sensors = <&tsens0 12>;

+ cooling-maps {
+ map0 {
+ trip = <&gpu_bottom_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu2_alert0: trip-point0 {
+ gpu_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
--
2.43.0


\
 
 \ /
  Last update: 2024-01-02 14:37    [W:0.086 / U:1.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site