lkml.org 
[lkml]   [2023]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 04/10] thermal: core: Add thermal_zone_update_trip_temp() helper routine
From
On 04/08/2023 23:05, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Introduce a helper routine called thermal_zone_update_trip_temp() that
> can be used to update a trip point's temperature with the help of a
> pointer to local data associated with that trip point provided by
> the thermal driver that created it.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>
> New patch in v4.
>
> ---
> drivers/thermal/thermal_trip.c | 37 +++++++++++++++++++++++++++++++++++++
> include/linux/thermal.h | 4 ++++
> 2 files changed, 41 insertions(+)
>
> Index: linux-pm/drivers/thermal/thermal_trip.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_trip.c
> +++ linux-pm/drivers/thermal/thermal_trip.c
> @@ -180,3 +180,40 @@ int thermal_zone_set_trip(struct thermal
>
> return 0;
> }
> +
> +/**
> + * thermal_zone_update_trip_temp - Update the trip point temperature.
> + * @tz: Thermal zone.
> + * @trip_priv: Trip tag.
> + * @temp: New trip temperature.
> + *
> + * This only works for thermal zones using trip tables and its caller must
> + * ensure that the zone lock is held before using it.
> + *
> + * @trip_priv is expected to be the value that has been stored by the driver
> + * in the struct thermal_trip representing the trip point in question, so it
> + * can be matched against the value of the priv field in that structure.
> + *
> + * If @trip_priv does not match any trip point in the trip table of @tz,
> + * nothing happens.
> + */
> +void thermal_zone_update_trip_temp(struct thermal_zone_device *tz,
> + void *trip_priv, int temperature)
> +{
> + int i;
> +
> + lockdep_assert_held(&tz->lock);
> +
> + if (!tz->trips || !trip_priv)
> + return;
> +
> + for (i = 0; i < tz->num_trips; i++) {
> + struct thermal_trip *trip = &tz->trips[i];
> +
> + if (trip->priv == trip_priv) {
> + trip->temperature = temperature;
> + return;
> + }
> + }
> +}
> +EXPORT_SYMBOL_GPL(thermal_zone_update_trip_temp);

This function would imply the comparator is always trip->priv but if we
want another comparison eg. trip->priv->id, that won't be possible.

Actually, I think you can reuse an existing function with a simple
change, for_each_thermal_trip() located in thermal_core.h.

The changes would be renaming it without the '__' prefix and moving it
in include/linux/thermal.h.

Then the comparison function and the temperature change can be an ACPI
driver specific callback passed as parameter to for_each_thermal_zone



> Index: linux-pm/include/linux/thermal.h
> ===================================================================
> --- linux-pm.orig/include/linux/thermal.h
> +++ linux-pm/include/linux/thermal.h
> @@ -286,9 +286,13 @@ int __thermal_zone_get_trip(struct therm
> struct thermal_trip *trip);
> int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
> struct thermal_trip *trip);
> +void thermal_zone_update_trip_temp(struct thermal_zone_device *tz,
> + void *trip_priv, int temperature);
>
> int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id,
> const struct thermal_trip *trip);
> +void thermal_zone_update_trip_temp(struct thermal_zone_device *tz,
> + void *trip_priv, int temperature);
>
> int thermal_zone_get_num_trips(struct thermal_zone_device *tz);
>
>
>
>

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2023-08-07 13:34    [W:0.171 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site