lkml.org 
[lkml]   [2023]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: stm32: add touchscreen on stm32f746-disco board
Date
The patch adds support for touchscreen on the stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

arch/arm/boot/dts/st/stm32f746-disco.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts
index c11616ed5fc6..4830ccd48cb3 100644
--- a/arch/arm/boot/dts/st/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f746-disco.dts
@@ -45,6 +45,7 @@
#include "stm32f746-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>

/ {
model = "STMicroelectronics STM32F746-DISCO board";
@@ -99,6 +100,22 @@ &i2c1 {
status = "okay";
};

+&i2c3 {
+ pinctrl-0 = <&i2c3_pins_a>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+ interrupt-parent = <&gpioi>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+ };
+};
+
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
--
2.32.0
\
 
 \ /
  Last update: 2023-07-04 19:35    [W:0.045 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site