Messages in this thread Patch in this message | | | From | Andrej Picej <> | Subject | [PATCH 1/2] ARM: dts: imx6: phytec: fix RTC interrupt level | Date | Tue, 4 Jul 2023 10:03:03 +0200 |
| |
RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Signed-off-by: Andrej Picej <andrej.picej@norik.com> --- arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi index 1a599c294ab8..1ca4d219609f 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -182,7 +182,7 @@ i2c_rtc: rtc@68 { pinctrl-0 = <&pinctrl_rtc_int>; reg = <0x68>; interrupt-parent = <&gpio7>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; status = "disabled"; }; }; -- 2.25.1
| |