lkml.org 
[lkml]   [2023]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [PATCH] i2c: imx-lpi2c: directly return ISR when detect a NACK
Date
Hi, Andy

> -----Original Message-----
> From: Andi Shyti <andi.shyti@kernel.org>
> Sent: Wednesday, June 14, 2023 8:09 AM
> To: Carlos Song <carlos.song@nxp.com>
> Cc: Aisheng Dong <aisheng.dong@nxp.com>; shawnguo@kernel.org;
> s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; Clark
> Wang <xiaoning.wang@nxp.com>; Bough Chen <haibo.chen@nxp.com>;
> dl-linux-imx <linux-imx@nxp.com>; linux-i2c@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: [EXT] Re: [PATCH] i2c: imx-lpi2c: directly return ISR when detect a NACK
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report this
> email' button
>
>
> Hi,
>
> On Wed, May 24, 2023 at 10:40:02AM +0800, carlos.song@nxp.com wrote:
> > From: Gao Pan <pandy.gao@nxp.com>
> >
> > A NACK flag in ISR means i2c bus error. In such codition, there is no
> > need to do read/write operation. It's better to return ISR directly
> > and then stop i2c transfer.
> >
> > Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
> > Signed-off-by: Gao Pan <pandy.gao@nxp.com>
> > Signed-off-by: Carlos Song <carlos.song@nxp.com>
>
> looks good to me, just a little note.
>
> > ---
> > drivers/i2c/busses/i2c-imx-lpi2c.c | 12 +++++++-----
> > 1 file changed, 7 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c
> > b/drivers/i2c/busses/i2c-imx-lpi2c.c
> > index 1af0a637d7f1..11240bf8e8e2 100644
> > --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> > +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> > @@ -514,15 +514,17 @@ static irqreturn_t lpi2c_imx_isr(int irq, void
> *dev_id)
> > temp = readl(lpi2c_imx->base + LPI2C_MSR);
> > temp &= enabled;
> >
> > + if (temp & MSR_NDF) {
> > + complete(&lpi2c_imx->complete);
> > + goto ret;
> > + }
> > +
> > if (temp & MSR_RDF)
>
> else if () and remove goto and brackets. You have used the "else if" below and
> we can keep it consistent.
>
> This way the commit log should be a bit different as we decide to check
> exclusively using else if's for the active bits.
> This way we also stop processing the MSR register if a NACK is received.
>
Carlos: I will use if else and remove goto in V2 patch.
> With the above I can give you a conditional r-b: are you able to pull Dong into
> this review as Wolfram asked?
>
Carlos: I have notified Aisheng. He will add review by.
> Thank you,
> Andi
>
> > lpi2c_imx_read_rxfifo(lpi2c_imx);
> > -
> > - if (temp & MSR_TDF)
> > + else if (temp & MSR_TDF)
> > lpi2c_imx_write_txfifo(lpi2c_imx);
> >
> > - if (temp & MSR_NDF)
> > - complete(&lpi2c_imx->complete);
> > -
> > +ret:
> > return IRQ_HANDLED;
> > }
> >
> > --
> > 2.34.1
> >

\
 
 \ /
  Last update: 2023-07-24 12:51    [W:0.092 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site