lkml.org 
[lkml]   [2023]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 0/5] Add peripherals for J784S4
    Date
    This series adds support for:
    - SERDES, WIZ DT nodes, Serdes lane control mux
    - MAIN CPSW2G nodes
    - DSS and DisplayPort-0 nodes

    This support DEPENDS upon another series which was introduced as part
    of discussion in v5. That series[1] moves the ti-serdes headers file
    from bindings to "arch/arm64/boot/dts/ti". (That series is ACKED and
    REVIEWED)

    Changelog v5->v6:
    - Change header file according to [1].
    - Add idle-state property in serdes_ln_ctrl node.
    - Fix dtbs_check warning due to clock-frequency property in serdes_refclk
    node by disabling the node in main.dtsi and enabling it in board file
    when the clock-frequency node is actually added.

    Changelog v4->v5:
    - rebased the patches on linux-next tip.

    Changelog v3->v4:
    - add reg property to serdes_ln_ctrl and fix the node name again to
    get rid of dtbs_check error.
    - reorder reg, reg-names and ranges property for main_cpsw1.
    - correct the order for clocks in serdes_wiz nodes to fix dtbs_check
    warnings.
    - fix indentation in reg, reg-names and clock property for dss node.
    - add comments for the reg type in dss registers.

    Changelog v3->v2:
    - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
    (Checked all the changes of the series with W=12 option during build)
    - added clock-frequency for serdes_refclk along with other EVM changes
    This refclk is being used by all the instances of serdes_wiz which
    are disabled by default. So configuring refclk when the serdes nodes
    are used for the first time is okay.

    Changelog v1->v2:
    - Moved J784S4 EVM changes together to the last patch
    (Suggested by Andrew)

    v5 patch link:
    <https://lore.kernel.org/all/20230710101705.154119-1-j-choudhary@ti.com/>

    [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>

    Rahul T R (2):
    arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
    arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

    Siddharth Vadapalli (3):
    arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
    arm64: dts: ti: k3-j784s4: Add Main CPSW2G node
    arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes

    arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 165 ++++++++++
    arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 353 +++++++++++++++++++++
    2 files changed, 518 insertions(+)

    --
    2.25.1

    \
     
     \ /
      Last update: 2023-07-21 15:22    [W:7.184 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site