Messages in this thread Patch in this message | | | Date | Mon, 10 Jul 2023 14:42:40 +0200 | From | Johan Jonker <> | Subject | [PATCH v4 3/3] mtd: rawnand: rockchip: add skipbbt option |
| |
On Rockchip SoCs the first boot stages are written on NAND with help of manufacturer software that uses a different format then the MTD framework. Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN option so that the original content is unchanged during the driver probe. The NAND_NO_BBM_QUIRK option allows us to erase bad blocks with the nand_erase_nand() function and the flash_erase command. With these options the user has the "freedom of choice" by neutral access mode to read and write in whatever format is needed.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> ---
Changed V4: Reduce subject size
Changes V3: Change prefixes
Changed V2: reword
---
I'm aware that the maintainer finds it "awful", but it's absolute necessary to: 1: read/write boot blocks in user space without touching original content 2: format a NAND for MTD either with built in or external driver module
So we keep it include in this serie. --- drivers/mtd/nand/raw/rockchip-nand-controller.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c index 5a04680342c3..fcda4c760ffa 100644 --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c @@ -188,6 +188,10 @@ struct rk_nfc { unsigned long assigned_cs; };
+static int skipbbt; +module_param(skipbbt, int, 0644); +MODULE_PARM_DESC(skipbbt, "Skip BBT scan if data on the NAND chip is not in MTD format."); + static inline struct rk_nfc_nand_chip *rk_nfc_to_rknand(struct nand_chip *chip) { return container_of(chip, struct rk_nfc_nand_chip, chip); @@ -1153,6 +1157,9 @@ static int rk_nfc_nand_chip_init(struct device *dev, struct rk_nfc *nfc,
nand_set_controller_data(chip, nfc);
+ if (skipbbt) + chip->options |= NAND_SKIP_BBTSCAN | NAND_NO_BBM_QUIRK; + chip->options |= NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE; chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-- 2.30.2
| |