lkml.org 
[lkml]   [2023]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes
From
On 10/07/2023 13:37, Praveenkumar I wrote:
> This patch adds thermal zone nodes for sensors present in
> IPQ5332.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index a1e3527178c0..8b276aeca53e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -527,4 +527,76 @@ timer {
> <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> };
> +
> + thermal-zones {
> + rfa-0-thermal{
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 11>;
> +
> + trips {
> + rfa-0-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + rfa-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 12>;
> +
> + trips {
> + rfa-1-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + misc-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 13>;
> +
> + trips {
> + misc-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu-top-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 14>;
> +
> + trips {
> + cpu-top-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };

Could you please add a passive cooling devices for the CPU?

> + };
> +
> + top-glue-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 15>;
> +
> + trips {
> + top-glue-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> };

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-07-10 13:24    [W:0.121 / U:1.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site