lkml.org 
[lkml]   [2023]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] net: phy: at803x: add qca8081 fifo reset on the link down
From


On 6/29/2023 9:23 PM, Andrew Lunn wrote:
>> +static int qca808x_fifo_reset(struct phy_device *phydev)
>> +{
>> + /* Reset serdes fifo on link down, Release serdes fifo on link up,
>> + * the serdes address is phy address added by 1.
>> + */
>> + return mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
>> + MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
>> + QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
>
> In polling mode, this is going to be called once per second. Do you
> really want to be setting that register all the time? Consider using
> the link_change_notify callback.
>
> Also, can you tell us more about this SERDES device on the bus. I just
> want to make sure this is not a PCS and should have its own driver.
>
> Andrew
Hi Andrew,
Thanks for the review.
yes, we can use the link_change_notify, since the fifo reset is needed
on the link changed, i will update the patch to use link_change_notify.

SERDES device is the block converts data between serial data and
parallel interfaces in each direction, which is the SGMII interface in
qca8081 PHY, it's address is always the PHY address added by 1 in
qca8081 PHY.

\
 
 \ /
  Last update: 2023-06-30 08:56    [W:0.062 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site