Messages in this thread | | | From | "Rafael J. Wysocki" <> | Date | Mon, 26 Jun 2023 19:15:14 +0200 | Subject | Re: [GIT PULL] thermal for v6.5-rc1 |
| |
Hi Daniel,
On Mon, Jun 26, 2023 at 5:33 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > Hi Rafael, > > please consider the following changes since commit > 0bb619f9227aa370330d2b309733d74750705053: > > thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures > (2023-06-15 18:07:48 +0200) > > are available in the Git repository at: > > > ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git > tags/thermal-v6.5-rc1 > > for you to fetch changes up to 57c9eaa4de537e6f08819d9214de502cac5a989c: > > thermal/drivers/qcom/temp-alarm: Use dev_err_probe (2023-06-26 > 12:10:22 +0200) > > ---------------------------------------------------------------- > - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad > Dybcio) > > - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki) > > - Add DT bindings for QCom ipq9574 (Praveenkumar I) > > - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren) > > - Allow selecting the bang-bang governor as default (Thierry Reding) > > - Refactor and prepare the code to set the scene for RCar Gen4 > (Wolfram Sang) > > - Cleanup and fixes for the QCom tsens drivers. Add DT bindings and > calibration for the MSM8909 platform (Stephan Gerhold) > > - Revert a patch introducing a wrong usage of devm_of_iomap() on the > Mediatek platform (Ricardo Cañuelo) > > - Fix the clock vs reset ordering in order to conform to the > documentation on the sun8i (Christophe JAILLET) > > - Prevent setting up undocumented registers, enable the only described > sensors and add the version 2.1 on the Qoriq sensor (Peng Fan) > > - Add DT bindings and support for the Armada AP807 (Alex Leibovich) > > - Update the mlx5 driver with the recent thermal changes (Daniel > Lezcano) > > - Convert to platform remove callback returning void on STM32 (Uwe > Kleine-König) > > - Add an error information printing for devm_thermal_add_hwmon_sysfs() > and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra, > Qoriq, Mediateka and QCom (Yangtao Li) > > - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai) > > - Use the dev_err_probe() function in the QCom tsens alarm driver > (Luca Weiss) > > ---------------------------------------------------------------- > Alex Leibovich (2): > dt-bindings: armada-thermal: Add armada-ap807-thermal compatible > thermal/drivers/armada: Add support for AP807 thermal data > > Chen-Yu Tsai (2): > thermal/drivers/mediatek/lvts_thermal: Register thermal zones as > hwmon sensors > thermal/drivers/generic-adc: Register thermal zones as hwmon sensors > > Christophe JAILLET (1): > thermal/drivers/sun8i: Fix some error handling paths in > sun8i_ths_probe() > > Daniel Lezcano (1): > net/mlx5: Update the driver with the recent thermal changes > > Konrad Dybcio (2): > dt-bindings: thermal: tsens: Add QCM2290 > dt-bindings: thermal: tsens: Add compatible for SM6375 > > Luca Weiss (1): > thermal/drivers/qcom/temp-alarm: Use dev_err_probe > > Matti Lehtimäki (2): > dt-bindings: thermal: tsens: Add compatible for MSM8226 > thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226 > > Pankit Garg (1): > thermal/drivers/qoriq: No need to program site adjustment register > > Peng Fan (2): > thermal/drivers/qoriq: Only enable supported sensors > thermal/drivers/qoriq: Support version 2.1 > > Praveenkumar I (1): > dt-bindings: thermal: tsens: Add ipq9574 compatible > > Ricardo Cañuelo (1): > Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid > resource leak in mtk_thermal_probe" > > Stefan Wahren (1): > dt-bindings: thermal: convert bcm2835-thermal bindings to YAML > > Stephan Gerhold (6): > thermal/drivers/qcom/tsens: Drop unused legacy structs > thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values > thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsets > dt-bindings: thermal: qcom-tsens: Drop redundant compatibles > dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible > thermal/drivers/qcom/tsens-v0_1: Add MSM8909 data > > Thierry Reding (1): > thermal: Allow selecting the bang-bang governor as default > > Uwe Kleine-König (1): > thermal/drivers/stm32: Convert to platform remove callback > returning void > > Wolfram Sang (3): > drivers/thermal/rcar_gen3_thermal: introduce 'info' structure > drivers/thermal/rcar_gen3_thermal: refactor reading fuses into > seprarate function > drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4 > > Yangtao Li (10): > thermal/hwmon: Add error information printing for > devm_thermal_add_hwmon_sysfs() > thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register() > thermal/drivers/amlogic: Remove redundant msg in > amlogic_thermal_probe() > thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() > and imx_sc_thermal_probe() > drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe() > thermal/drivers/tegra: Remove redundant msg in > tegra_tsensor_register_channel() > thermal/drivers/qoriq: Remove redundant msg in > qoriq_tmu_register_tmu_zone() > thermal/drivers/ti-soc: Remove redundant msg in > ti_thermal_expose_sensor() > thermal/drivers/qcom: Remove redundant msg at probe time > thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in > lvts_ctrl_start()
Pulled and added to the thermal branch of linux-pm.git.
Thanks!
| |